INSTALLATION NOTES for OpenBSD/sparc64 3.3
What is OpenBSD?
----------------
OpenBSD is a fully functional, multi-platform UN*X-like Operating
System based on Berkeley Networking Release 2 (Net/2) and 4.4BSD-Lite.
There are several operating systems in this family, but OpenBSD
differentiates itself by putting security and correctness first. The
OpenBSD team strives to achieve what is called 'a secure by default'
status. This means that an OpenBSD user should feel safe that their
newly installed machine will not be compromised. This 'secure by
default' goal is achieved by taking a proactive stance on security.
Since security flaws are essentially mistakes in design or implement-
ation, the OpenBSD team puts as much importance on finding and fixing
existing design flaws and implementation bugs as it does writing new
code. This means that an OpenBSD system will not only be more secure,
but it will be more stable. The source code for all critical system
components has been checked for remote-access, local-access, denial-
of-service, data destruction, and information-gathering problems.
In addition to bug fixing, OpenBSD has integrated strong cryptography
into the base system. A fully functional IPsec implementation is
provided as well as support for common protocols such as SSL and SSH.
Network filtering and monitoring tools such as packet filtering, NAT, and
bridging are also standard. For high performance demands, support for
hardware cryptography has also been added to the base system. Because
security is often seen as a tradeoff with usability, OpenBSD provides
as many security options as possible to allow the user to enjoy secure
computing without feeling burdened by it.
To integrate more smoothly in other environments, OpenBSD 3.3 also
provides several binary emulation subsystems (which includes
iBCS2, Linux, OSF/1, SunOS, SVR4, Solaris, and Ultrix compatibility),
aiming at making the emulation as accurate as possible so that it is
transparent to the user.
Because OpenBSD is from Canada, the export of Cryptography pieces
(such as SSH, IPsec, and Kerberos) to the world is not restricted.
(NOTE: OpenBSD can not be re-exported from the US once it has entered
the US. Because of this, take care NOT to get the distribution from
an FTP server in the US if you are outside of Canada and the US.)
The 3.3 release features more user programs and device drivers,
extensive firewalling and network bandwidth management capabilities,
as well as numerous security mechanisms (stricter control over memory
execute and write permissions, compiler built-in stack protection,
privilege separation or early revocation of privileges in more and
more executables, etc).
OpenBSD/sparc64 3.3 is a port to machines based on the UltraSPARC
processor, such as the workstations manufactured by Sun Microsystems.
Since the previous release, device support still has improved a lot (new
models and on-board devices support), and stability has improved.
More applications from the ports collection have been compiled and tested on
this platform as well.
Sources of OpenBSD:
-------------------
This is a list of currently known ftp servers as the time of the 3.3 release.
For a more recent list, please refer to http://www.openbsd.org/ftp.html
Main server in Canada:
ftp://ftp.openbsd.org/pub/OpenBSD
Australia:
ftp://mirror.aarnet.edu.au/pub/OpenBSD (Canberra)
ftp://ftp.it.net.au/mirrors/OpenBSD (Perth)
ftp://ftp.planetmirror.com/pub/OpenBSD (Sydney)
ftp://ftp.wiretapped.net/pub/OpenBSD (Sydney)
Austria:
ftp://gd.tuwien.ac.at/opsys/OpenBSD (Vienna)
ftp://mingus.wu-wien.ac.at/pub/OpenBSD (Vienna)
Belgium:
ftp://openbsd.rug.ac.be/pub/OpenBSD (Ghant)
Brasil:
ftp://ftp.openbsd.org.br/pub/OpenBSD (Curitiba)
Canada:
ftp://ftp.ca.openbsd.org/pub/OpenBSD (Edmonton)
ftp://gulus.usherb.ca/pub/OpenBSD (Sherbrooke)
China (Hong Kong):
ftp://ftp.shellhung.org/pub/OpenBSD
Czech Republic:
ftp://ftp.openbsd.cz/pub/OpenBSD
Denmark:
ftp://sunsite.dk/mirrors/openbsd
Finland:
ftp://ftp.fi.debian.org/pub/OpenBSD
ftp://ftp.jyu.fi/pub/OpenBSD (Jyvaskyla)
France:
ftp://ftp.fr.openbsd.org/pub/OpenBSD
ftp://ftp.bsdfr.org/pub/OpenBSD
ftp://ftp.club-internet.fr/pub/OpenBSD
Germany:
ftp://ftp.de.openbsd.org/pub/unix/OpenBSD (Berlin)
ftp://ftp.freenet.de/pub/ftp.openbsd.org/pub/OpenBSD (Duesseldorf)
ftp://ftp-stud.fht-esslingen.de/pub/OpenBSD (Esslingen)
ftp://pandemonium.tiscali.de/pub/OpenBSD (Frankfurt)
ftp://ftp.leo.org/pub/OpenBSD (Muenchen)
ftp://ftp.uni-stuttgart.de/pub/OpenBSD (Stuttgart)
ftp://ftp.fh-wolfenbuettel.de/pub/os/openbsd (Wolfenbuettel)
Greece:
ftp://filoktitis.noc.uoa.gr/pub/OpenBSD (Athens)
ftp://ftp.duth.gr/pub/OpenBSD (Thrace)
Hungary:
ftp://ftp.fsn.hu/pub/OpenBSD
Ireland:
ftp://ftp.esat.net/pub/OpenBSD (Dublin)
Italy:
ftp://ftp.openbsd.it/pub/OpenBSD (Napoli)
ftp://ftp.volftp.mondadori.com/mirror/openbsd
Japan:
ftp://ftp.jp.openbsd.org/pub/OpenBSD (Tokyo)
ftp://ftp.netlab.is.tsukuba.ac.jp/pub/os/OpenBSD (Ibaraki)
ftp://ftp.iij.ad.jp/OpenBSD (Tokyo)
ftp://ftp.kddlabs.co.jp/OpenBSD (Tokyo)
Lithuania:
ftp://ftp.openbsd.lt/pub/OpenBSD
The Netherlands:
ftp://ftp.calyx.nl/pub/OpenBSD (Amsterdam)
ftp://ftp.nl.uu.net/pub/OpenBSD (Amsterdam)
ftp://ftp.nluug.nl/pub/OpenBSD (Amsterdam)
Norway:
ftp://ftp.inet.no/pub/OpenBSD (Oslo)
ftp://ftp.uninett.no/pub/OpenBSD (Oslo)
Peru:
ftp://ftp.sajinet.com.pe/pub/OpenBSD
Poland:
ftp://sunsite.icm.edu.pl/pub/OpenBSD
Russia:
ftp://ftp.chg.ru/pub/OpenBSD (Chernogolovka)
ftp://ftp.radio-msu.net/pub/OpenBSD (Moscow)
ftp://ftp.openbsd.ru/pub/OpenBSD (Novosibirsk)
Saudi Arabia:
ftp://ftp.isu.net.sa/pub/mirrors/ftp.openbsd.org/pub/OpenBSD
South Korea:
ftp://ftp.snu.ac.kr/pub/BSD/OpenBSD (Seoul)
Spain:
ftp://ftp.rediris.es/mirror/OpenBSD (Madrid)
Sweden:
ftp://ftp.luth.se/pub/OpenBSD
ftp://ftp.stacken.kth.se/pub/OpenBSD (Stockholm)
ftp://ftp.sunet.se/pub/OpenBSD (Uppsala)
ftp://mirror.pudas.net/OpenBSD (Uppsala)
Switzerland:
ftp://sunsite.cnlab-switch.ch/pub/OpenBSD (Zurich)
Taiwan:
ftp://openbsd.csie.nctu.edu.tw/pub/OpenBSD
ftp://openbsd.nsysu.edu.tw/pub/OpenBSD
ftp://ftp.tku.edu.tw/pub/OpenBS (TamSui)
Thailand:
ftp://ftp.kmitl.ac.th/pub/OpenBSD
Turkey:
ftp://ftp.linux.org.tr/OpenBSD
United Kingdom:
ftp://ftp.plig.org/pub/OpenBSD (London)
USA:
ftp://gandalf.neark.org/pub/distributions/OpenBSD (Batesville, AR)
ftp://ftp5.usa.openbsd.org/pub/OpenBSD (Redwood City, CA)
ftp://ftp3.usa.openbsd.org/pub/OpenBSD (Boulder, CO)
ftp://mirror.csit.fsu.edu/pub/OpenBSD (Tallahassee, FL)
ftp://ftp.src.uchicago.edu/pub/OpenBSD (Chicago, IL)
ftp://rt.fm/pub/OpenBSD (Lake in the Hills, IL)
ftp://archive.progeny.com/OpenBSD (Indianapolis, IN)
ftp://ftp7.usa.openbsd.org/pub/os/OpenBSD (West Lafayette, IN)
ftp://mirrors.netnumina.com/openbsd (Cambridge, MA)
ftp://ftp.groupbsd.org/pub/OpenBSD (Hillsborough, NC)
ftp://ftp.cse.buffalo.edu/pub/OpenBSD (Buffalo, NY)
ftp://ftp.op.net/pub/OpenBSD (Ambler, PA)
ftp://carroll.cac.psu.edu/pub/OpenBSD (State College, PA)
ftp://mirrors.rcn.net/pub/OpenBSD (Fairfax, VA)
ftp://openbsd.secsup.org/pub/openbsd (Fairfax, VA)
ftp://ftp.tux.org/bsd/openbsd (Springfield, VA)
ftp://mirror.cs.wisc.edu/pub/mirrors/OpenBSD (Madison, WI)
As well, the file ftp://ftp.openbsd.org/pub/OpenBSD/3.3/ftplist
contains a list which is continually updated. If you wish to become a
distribution site for OpenBSD, contact <miod@openbsd.org>.
OpenBSD 3.3 Release Contents:
-----------------------------
The OpenBSD 3.3 release is organized in the following way. In the
.../3.3 directory, for each of the architectures having an OpenBSD 3.3
binary distribution, there is a sub-directory.
The sparc64-specific portion of the OpenBSD 3.3 release is found in the
"sparc64" subdirectory of the distribution. That subdirectory is laid
out as follows:
.../3.3/sparc64/
INSTALL.sparc64 Installation notes; this file.
CKSUM Output of the cksum(1) and md5(1) programs
MD5 usable for verification of the correctness
of downloaded files.
miniroot33.fs A miniroot filesystem image to be used
if you for some reason can't or don't
want to use the ramdisk installation
method.
It can be copied to the swap partition of
an existing OpenBSD, Solaris, NetBSD or Linux
installation to allow installing or upgrading
to OpenBSD 3.3.
floppy33.fs The standard sparc64 boot and installation
floppy; see below.
This floppy image will boot on SBus-based
sparc64 models, such as:
- Ultra 1/1E
- Ultra 2
*.tgz sparc64 binary distribution sets;
see below.
bsd A stock GENERIC sparc64 kernel which
will be installed on your system
during the install.
bsd.rd A compressed RAMDISK kernel; the embedded
filesystem contains the installation tools.
Used for simple installation from a pre-
existing system.
cd33.iso A miniroot filesystem image suitable to be used
as a bootable CD-ROM image; otherwise similar
to the bsd.rd image above.
installboot The OpenBSD/sparc64 boot loader installation
program
bootblk The OpenBSD/sparc64 boot block
ofwboot The OpenBSD/sparc64 secondary boot loader
ofwboot.net The OpenBSD/sparc64 network boot loader
Please note that there are multiple bootable images and kernels, intended
to allow installing OpenBSD/sparc64 in a variety of situations without
requiring a pre-existing working operating system.
The kernel and boot images are provided for net booting installations.
Bootable installation/upgrade floppy image:
The single floppy image can be copied to a floppy using rawrite.exe,
ntrw.exe or `dd', as described later in this document.
The floppy image is a bootable install floppy which can be used
both to install and to upgrade OpenBSD to the current version.
It is also useful for maintenance and disaster recovery.
The OpenBSD/sparc64 binary distribution sets contain the binaries which
comprise the OpenBSD 3.3 release for sparc64 systems. There are ten
binary distribution sets. The binary distribution sets can be found in
the "sparc64" subdirectory of the OpenBSD 3.3 distribution tree,
and are as follows:
base33 The OpenBSD/sparc64 3.3 base binary distribution. You
MUST install this distribution set. It contains the
base OpenBSD utilities that are necessary for the
system to run and be minimally functional.
It includes shared library support, and excludes
everything described below.
[ 34.5 MB gzipped, 110.7 MB uncompressed ]
comp33 The OpenBSD/sparc64 Compiler tools. All of the tools
relating to C, C++, and fortran are supported. This set
includes the system include files (/usr/include), the
linker, the compiler tool chain, and the various system
libraries (except the shared libraries, which are
included as part of the base set).
This set also includes the manual pages for all
of the utilities it contains, as well as the system
call and library manual pages.
[ 21.8 MB gzipped, 84.1 MB uncompressed ]
etc33 This distribution set contains the system configuration
files that reside in /etc and in several other places.
This set MUST be installed if you are installing the
system from scratch, but should NOT be used if you are
upgrading. (If you are upgrading, it's recommended that
you get a copy of this set and CAREFULLY upgrade your
configuration files by hand, see the section named "Upgrading
a previously-installed OpenBSD System" below.)
[ 1.5 MB gzipped, 5.6 MB uncompressed ]
game33 This set includes the games and their manual pages.
[ 2.7 MB gzipped, 6.2 MB uncompressed ]
man33 This set includes all of the manual pages for the
binaries and other software contained in the base set.
Note that it does not include any of the manual pages
that are included in the other sets.
[ 6.3 MB gzipped, 22.4 MB uncompressed ]
misc33 This set includes the system dictionaries (which are
rather large), and the typesettable document set.
[ 1.9 MB gzipped, 6.2 MB uncompressed ]
xbase33 This set includes the base X distribution. This includes
programs, headers, libraries, and configuration files.
[ 8.9 MB gzipped, 29.2 MB uncompressed ]
xfont33 This set includes all of the X fonts.
[ 32.3 MB gzipped, 35.9 MB uncompressed ]
xserv33 This set includes all of the X servers.
[ 6.8 MB gzipped, 18.8 MB uncompressed ]
xshare33 This set includes all text files equivalent between
all architectures.
[ 1.6 MB gzipped, 7.8 MB uncompressed ]
OpenBSD System Requirements and Supported Devices:
--------------------------------------------------
OpenBSD/sparc64 3.3 runs on the following classes of machines:
- SBUS based workstations:
Ultra 1
Ultra 1E (Creator)
Ultra 2
- PCI based workstations:
SUNBlade 100/150
SUN Fire V100
SUN Fire V120
Enterprise 220R
Enterprise 250
Enterprise 450
Netra T1 100/105
Netra t 1400/1405
Netra X1
Ultra 5
Ultra 10
Ultra 30
Ultra 60
SPARCengineUltra AX
SPARCengineUltra AXi
- CompactPCI boards:
SPARCengine CP1500
- faithful clones of the above Sun systems.
If your machine is not listed above, it is very likely that OpenBSD/sparc64
does not work on it (yet).
The minimal configuration requires 32M of RAM and ~160M of disk space.
To install the entire system requires much more disk space, and to run
X or compile the system, more RAM is recommended.
Supported devices include:
SCSI Host Adapters:
SBus NCR53c9x adapters (esp)
SBus 10/100Mbit SunSwift Ethernet+SCSI cards, aka HME + FAS366
cards (esp)
SBus QLogic adapters (isp)
PCI NCR53c8xx adapters (siop)
PCI IDE Controllers: (pciide)
Acer Labs M5229
Command Technologies PCI0646
National Semiconductor PC87415
Promise PDC20267
Other PCI IDE controllers may work, but have not been tested
Ethernet Adapters:
onboard AMD Lance ethernet (le)
SBus AMD Lance ethernet cards (le)
SBus 10/100MBit Sun FastEthernet 1.0 cards (qec/be)
SBus Quad 10MBit Sun QuadEthernet cards (qec/qe)
onboard SBus/PCI HME Ethernet cards (hme)
SBus 10/100Mbit Ethernet cards (hme)
SBus 10/100Mbit SunSwift Ethernet+SCSI cards (hme)
SBus Quad 10/100MBit Quad Fast Ethernet cards (hme, qfe)
PCI Fast Ethernet (hme)
PCI Quad Fast Ethernet (hme)
PCI GEM Ethernet (gem)
PCI Alteon Tigon I/II PCI Gigabit Ethernet boards(ti)
PCI Davicom DM9102 Ethernet (dc)
PCI Intel 21145-based adapters (dc)
PCI Intel i8255x-based (except the i82556) adapters (fxp)
PCI 3Com 3c9xx EtherLink XL adapters (xl)
Wireless Ethernet Adapters
Compact Flash Adapters (will show up as PCMCIA adapters)
Buffalo AirStation CF [A]
ELSA XI800 CF [A]
PCMCIA Adapters
3Com AirConnect 3CRWE737A PCMCIA [A]
ACTIONTEC HWC01170 PCMCIA [A]
Addtron AWP-100 PCMCIA [A]
Agere Orinoco PCMCIA [A]
BUFFALO AirStation PCMCIA [A]
Cabletron RoamAbout PCMCIA [A]
Compaq Agency NC5004 PCMCIA [A]
Contec FLEXLAN/FX-DS110-PCC PCMCIA [A]
Corega PCC-11 PCMCIA [A]
Corega PCCA-11 PCMCIA [A]
Corega PCCB-11 PCMCIA [A]
Corega CGWLPCIA11 PCMCIA [A]
Dlink DWL650 PCMCIA [A]
ELSA XI300 PCMCIA [A]
ELSA XI325 PCMCIA [A]
ELSA XI325H PCMCIA [A]
EMTAC A2424i PCMCIA [A]
Ericsson Wireless LAN CARD C11 PCMCIA [A]
Gemtek WL-311 PCMCIA [A]
Hawking Technology WE110P PCMCIA [A]
I-O DATA WN-B11/PCM PCMCIA [A]
Intel PRO/Wireless 2011 PCMCIA [A]
Intersil Prism II PCMCIA [A]
Linksys Instant Wireless WPC11 PCMCIA [A]
Linksys Instant Wireless WPC11 2.5 PCMCIA [A]
Linksys Instant Wireless WPC11 3.0 PCMCIA [A]
Lucent WaveLAN PCMCIA [A]
NANOSPEED ROOT-RZ2000 PCMCIA [A]
NEC CMZ-RT-WP PCMCIA [A]
Netgear MA401 PCMCIA [A]
Netgear MA401RA PCMCIA [A]
Nokia C020 Wireless LAN PCMCIA [A]
Nokia C110/C111 Wireless LAN PCMCIA [A]
NTT-ME 11Mbps Wireless LAN PCMCIA [A]
Proxim Harmony PCMCIA [A]
Proxim RangeLAN-DS PCMCIA [A]
Samsung MagicLAN SWL-2000N PCMCIA [A]
SMC 2632 EZ Connect PCMCIA [A]
Symbol Spectrum24 PCMCIA [A]
TDK LAK-CD011WL PCMCIA [A]
US Robotics 2410 PCMCIA [A]
US Robotics 2445 PCMCIA [A]
PCI Adapters
3Com AirConnect 3CRWE777A PCI [A]
Belkin F5D6000 PCI (a rebadged WL11000P) [A]
Eumitcom WL11000P PCI [A]
Dlink DWL520 PCI [A]
Global Sun Technology GL24110P PCI (untested) [A]
Global Sun Technology GL24110P02 PCI [A]
LinkSys WDT11 PCI (a rebadged GL24110P02) [A]
NDC/Sohoware NCP130 PCI [A]
Netgear MA301 PCI [A]
US Robotics 2415 PCI (rebadged WL11000P) [A]
Serial ports:
onboard SBUS Zilog 8530 (zs)
onboard EBUS Infineon (Siemens) 82532 (sab)
onboard 16550 compatibles (com)
SBus MAGMA cards including: 4Sp, 8Sp, 12Sp, 16Sp,
LC2+1Sp, 2+1Sp, 4+1Sp, 8+2Sp, and 2+1HS Sp
SBus Serial Parallel Interface (spif)
Aurora SBus sio2 Serial Interface (asio)
Sound devices:
onboard SBus CS4321 (audiocs)
onboard EBus/PCI CS4231 (audioce)
Trident 4DWAVE-DX/NX, SiS 7018, ALi M5451 (autri)
Enqsoniq AudioPCI (eap)
Cryptography accelerators:
Hifn 6500 (lofn)
Hifn 7751/7811/7951/9751 (hifn)
Bluesteelnet 5501/5601 (ubsec)
Broadcom 5801/5802/5805/5820/5821/5822 (ubsec)
Keyboard and mices:
Type 4, 5 and 6 keyboards on Zilog serial ports (zskbd)
Type 4, 5 and 6 keyboards on NS16550 serial ports (comkbd)
Type 6 keyboards on USB (ukbd)
PS/2 AT keyboards (pckbd)
Sun mice on Zilog serial ports (zstty)
Sun mice on NS16550 serial ports (com)
USB mice (ums)
PS/2 mice (pms or pmsi)
Framebuffers:
SBUS framebuffers:
bwtwo (monochrome, unaccelerated)
cgthree (8 bit color, unaccelerated)
cgsix (8 bit color)
PCI video boards:
ATI Rage (vgafb), includes the on-board PGX (8 bit
color, unaccelerated) and PGX24 (24 bit color,
accelerated) framebuffers
UPA Creator/Creator3D/Elite3D (24 bit color, unaccelerated)
PC Cards (PCMCIA):
PCMCIA Controllers:
SBus pcmcia bridge (stp)
Wireless ethernet adapters:
See above.
Miscellaneous devices:
EBus beeper (beeper)
performance counters/system controller (uperf)
Drivers for hardware marked with [A] are not included in the ramdisk.
Hardware the we do NOT currently support, but get many questions about:
Multiprocessor machines.
Floppy driver (except for booting).
SBUS and PCI cards other than those listed above.
Getting the OpenBSD System onto Useful Media:
---------------------------------------------
Installation is supported from several media types, including:
CD-ROM (NOT supported if booting from floppy)
FFS partitions
Tape
FTP
HTTP
If you have the OpenBSD CD-ROM distribution (and a CD-ROM drive), you may be
able boot from it, or from the supplied bootable CD-ROM mini image. If you
can boot from the CD-ROM, you are home free and can proceed to the
installation steps. If not, you will need to do some setup work to prepare
a bootable image, either a floppy, hard drive, or compatible net boot
server.
In addition to the bootable image, you also need to consider how to
access the binary distribution sets to actually install the system.
Although you can access the distribution sets directly from the CD-ROM or
from one of the FTP mirrors over the internet, you may wish to transfer
the sets to a local FTP server, or copy them to a partition on the target
system's disk.
Creating a bootable floppy disk using DOS/Windows:
First you need to get access to the OpenBSD bootable floppy
images. If you can access the distribution from the CD-ROM under
DOS, you will find the bootable disks in the 3.3/sparc64
directory. Otherwise, you will have to download them from one of
the OpenBSD ftp or http mirror sites, using an ftp client or a web
browser. In either case, take care to do "binary" transfers, since
these are images files and any DOS cr/lf translations or control/z
EOF interpretations will result in corrupted transfers.
You will also need to go to the "tools" directory and grab a
copy of the rawrite.exe utility and its documentation. This
program is needed to correctly copy the bootable filesystem
image to the floppy, since it's an image of a unix partition
containing a ffs filesystem, not a MSDOS format diskette.
Once you have installed rawrite.exe, just run it and specify the
name of the bootable image, such as "floppy33.fs" and the name of
the floppy drive, such as "a:". Be sure to use good quality HD
(1.44MB) floppies, formatted on the system you're using. The
image copy and boot process is not especially tolerant of read
errors.
Note that if you are using NT, 2000, or XP to write the
images to disk, you will need to use ntrw.exe instead. It
is also available in the "tools" directory. Grab it and
run in with the correct arguments like this "ntrw <image>
<drive>:"
Note that, when installing, the boot floppy can be write-protected
(i.e read-only).
Creating a bootable floppy disk using SunOS, Solaris or other Un*x-like system:
First, you will need obtain a local copy of the bootable filesystem
image as described above. If possible use the cksum(1) or md5(1)
commands to verify the checksums of the images vs. the values in
the CKSUM or MD5 files on the mirror site.
Next, use the dd(1) utility to copy the file to the floppy drive.
The command would likely be, under SunOS:
dd if=floppy33.fs of=/dev/rfd0c bs=36b
and, under Solaris:
dd if=floppy33.fs of=/dev/rdiskette0 bs=36b
unless the volume management daemon, vold(1M), is running, in
which case the following command is preferable:
dd if=floppy33.fs of=/vol/dev/rdiskette0 bs=36b
If you are using another operating system, you may have to adapt
this to conform to local naming conventions for the floppy and
options suitable for copying to a "raw" floppy image. The key
issue is that the device name used for the floppy *must* be one
that refers to the correct block device, not a partition or
compatibility mode, and the copy command needs to be compatible
with the requirement that writes to a raw device must be in
multiples of 512-byte blocks. The variations are endless and
beyond the scope of this document.
If you're doing this on the system you intend to boot the floppy on,
copying the floppy back to a file and doing a compare or checksum
is a good way to verify that the floppy is readable and free of
read/write errors.
Note that, when installing, the boot floppy can be write-protected
(i.e. read-only).
Creating a bootable hard disk using SunOS, Solaris or other Un*x-like system:
If you don't have a floppy drive you can copy the mini-root
"miniroot33.fs" onto the hard disk you intend to boot on.
Traditionally, the way to do this is to use dd(1) to place the
bootable filesystem image in the "swap" partition of the disk
(while running in single user mode), and then booting from that
partition.
Using the "b" partition allows you to boot without overwriting
any useful parts of the disk, you can also use another partition,
but don't used the "a" or "c" partition without understanding
the disklabel issues described below under "incompatible systems".
This requires that you be running SunOS, Solaris, OpenBSD or NetBSD
which have a compatible view of SunOS disk labels and partitions.
Use the dd(1) utility to copy the file to the hard drive.
The command would likely be, under SunOS:
dd if=miniroot33.fs of=/dev/rsd0b bs=64b
and under Solaris:
dd if=miniroot33.fs of=/dev/rdsk/c0t0d0s1 bs=64b
The blocksize is arbitrary as long as it's a multiple of 512-bytes
and within the maximum supported by the driver, i.e. bs=126b may
not work for all cases. Again, device/partition names may vary,
depending on the OS involved.
If you are preparing the hard drive on an incompatible system or
don't care about the hard disk contents, you can also install the
bootable image starting at the beginning of the disk. This lets
you prepare a bootable hard-drive even if don't have a working
operating system on your machine, but it important to understand
that the bootable image installed this way includes a "disk label"
which can wipe out any pre-existing disklabels or partitioning for
the drive.
If you're starting with a virgin disk and trying to do this under
SunOS, use format(8) and newfs(8) to set up the partitions and
mark the intended partition as an normal partition type. If you're
using OpenBSD, perhaps on another architecture, OpenBSD will
create a "fictitious label" that will let you access the whole
disk.
Creating a network bootable setup using SunOS or other Un*x-like system:
The details of setting up a network bootable environment vary
considerably, depending on the network's host. Extract the
OpenBSD diskless(8) man page from the man33.tgz distribution
set or see the copy on the OpenBSD web page. You will also
need to reference the relevant man pages or administrators guide
for the host system.
Basically, you will need to set up reverse-arp (rarpd) and boot
parameter (bootpd) information and make the OpenBSD bootblock,
kernel/miniroot partition, and a swap file available as required
by the netboot setup.
The steps necessary to prepare the distribution sets for installation
depend on which method of installation you choose. Some methods
require a bit of setup first that is explained below.
The installation allows installing OpenBSD directly from FTP mirror
sites over the internet, however you must consider the speed and
reliability of your internet connection for this option. It may save
much time and frustration to use ftp get/reget to transfer the
distribution sets to a local server or disk and perform the installation
from there, rather than directly from the internet.
The variety of options listed may seem confusing, but situations vary
widely in terms of what peripherals and what sort of network arrangements
a user has, the intent is to provide some way that will be practical.
Creating an installation tape:
While you won't be able to boot OpenBSD from a tape, you can use
one to provide the installation sets. To do so, you need to make
a tape that contains the distribution set files, each in "tar"
format or in "gzipped tar format". First you will need to
transfer the distribution sets to your local system, using ftp or
by mounting the CD-ROM containing the release. Then you need to
make a tape containing the files.
If you're making the tape on a UN*X-like system, the easiest way
to do so is make a shell script along the following lines, call it
"/tmp/maketape".
#! /bin/sh
TAPE=${TAPE:-/dev/nrst0}
mt -f ${TAPE} rewind
for file in base etc comp game man misc xbase xfont xserv xshare
do
dd if=${file}33.tgz of=${TAPE} obs=8k conv=sync
done
tar cf ${TAPE} bsd
mt -f ${TAPE} offline
# end of script
And then:
cd .../3.3/sparc64
sh -x /tmp/maketape
If you're using a system other than OpenBSD or SunOS, the tape
name and other requirements may change. You can override the
default device name (/dev/nrst0) with the TAPE environment
variable. For example, under Solaris, you would probably run:
TAPE=/dev/rmt/0n sh -x /tmp/maketape
Note that, when installing, the tape can be write-protected
(i.e. read-only).
If you are upgrading OpenBSD, you also have the option of installing
OpenBSD by putting the new distribution sets somewhere in your
existing file system, and using them from there. To do that, do
the following:
Place the distribution sets you wish to upgrade somewhere
in your current file system tree. At a bare minimum, you
must upgrade the "base" binary distribution, and so must
put the "base33" set somewhere in your file system. It
is recommended that you upgrade the other sets, as well.
Preparing your System for OpenBSD Installation:
-----------------------------------------------
If your UltraSPARC machine is somewhat old, it might need a firmware update
before it can be used under OpenBSD. You are advised to try to install
OpenBSD first; if it can't boot or fails mysteriously, you might need to
update your firmware. To do so, check the ``Updating your firmware''
section later in this document.
Your OpenBOOT ROM may need some setup. You cannot use the security modes
of the OpenBOOT ROM. Make sure that the ROM security modes are disabled:
ok setenv security-mode none
Please note that while OpenBSD and Solaris have a reasonable degree of
compatibility between disk labels and filesystems there are some problems
to watch out for during initial installation or when trying to maintain
both OpenBSD and Solaris environments on the same system.
If the OpenBSD fsck(8) utility is used on a Solaris filesystem, it will
set OpenBSD "clean flags" and BSD4.4 summary fields in the superblock.
Solaris does *not* like this and you will have to do a "fsck -b 32" under
Solaris to access an alternate superblock to repair the filesystem. You
should always specify Solaris filesystem with a "pass number" of 0 in
their /etc/fstab entry to prevent this, and preferably mount them "RO".
If Solaris fsck is used on an OpenBSD filesystem in the default OpenBSD
(4.4BSD) format, it will first complain about the superblock and then
about missing . and .. entries. Do *not* try to "correct" these
problems, as attempting to do so will completely trash the filesystem.
You should avoid using soft updates (option softdep in /etc/fstab)
on your shared filesystems. Although untested, it is likely that
Solaris would be confused by a filesystem with soft update flags
enabled.
The OpenBSD "Sun Compatible" disklabel have been extended to support 16
partitions, which may be compatible with Solaris, but the Solaris
format(1M) utility only sees the first 8 partitions and may "lose"
information about the extended partitions.
Use Solaris format(1M) only with *extreme* caution on drives that contain
OpenBSD partitions.
OpenBSD and Sun bootblocks are similar in concept, though implemented
differently. The OpenBSD bootblocks are architecture independent and also
understand the extended disklabels with 16 partitions. You can use Solaris
bootblocks, but remember that OpenBSD bootblocks must be installed with
OpenBSD installboot and Solaris bootblocks with Solaris installboot.
Most of the new Ultras shipped by Sun with a preinstalled Solaris have an
initial specific factory setup of the boot ROM, in order to start up
Solaris WebStart at the first boot; the boot-device variable is set to
disk:f. Make sure you reset the boot device to its default value:
ok set-default boot-device
will work for most systems. This can be adapted if you've multiple
systems installed and know what you're doing.
Updating your firmware:
-----------------------
If OpenBSD does not boot or install properly on your machine, it might need
a firmware update.
Updating your firmware is a dangerous operation which may damage your
hardware. Be sure to follow carefully these instructions, and if in doubt,
please don't do this.
You will need to have a working operating system installed on your machine,
in order to perform the update. If this is not the case, you might be able
to boot the flash updater software via network, but this has not been tested
and is not supported by Sun.
The firmware update is delivered as a specific patch, depending on your
machine:
Machine Patch number
Blade 100/150 111179
Enterprise 220R 106455
Enterprise 250 106503
Enterprise 450 106122
Netra X1 111952
Ultra 1 104881
Ultra 1E 104288
Ultra 2 104169
Ultra 5/10 106121
Ultra 30 105930
Ultra 60 106455
Get the patch installation notes from SunSolve, as
ftp://sunsolve.sun.com/pub/patches/104169.readme
(replace 104169 with the correct patch number).
Check the Patch-ID# line in this readme file to get the patch filename, for
example 104169-08. The patch filename will then be either
ftp://sunsolve.sun.com/pub/patches/104169-08.tar.Z
or
ftp://sunsolve.sun.com/pub/patches/104169-08.zip
Follow the patch installation notes very carefully. You will need to open
your machine in order to apply this patch.
Installing the OpenBSD System:
------------------------------
Installing OpenBSD is a relatively complex process, but if you have
this document in hand and are careful to read and remember the
information which is presented to you by the install program, it
shouldn't be too much trouble.
Before you begin, you should know the geometry of your hard disk, i.e.
the sector size (note that sector sizes other than 512 bytes are not
currently supported), the number of sectors per track, the number of
tracks per cylinder (also known as the number of heads), and the
number of cylinders on the disk. The OpenBSD kernel will try to
discover these parameters on its own, and if it can it will print them
at boot time. If possible, you should use the parameters it prints.
(You might not be able to because you're sharing your disk with
another operating system, or because your disk is old enough that the
kernel can't figure out its geometry.)
There are several ways to install OpenBSD onto a disk. The easiest way
in terms of preliminary setup is to use the OpenBSD installation
cdrom, or the installation floppy.
If your machine is hooked up in a network and you can find a server to
arrange for a diskless setup, which is a convenient way to install on a
machine whose disk does not currently hold a usable operating system.
This is difficult to get set up correctly the first time, but easy to
use afterwards. (see ``Installing using a diskless setup'' below).
It is also possible to install OpenBSD "manually" from a running Solaris
system, using the system tools, as well as gunzip; see ``Installing from
Solaris'' below.
Booting from the Installation Media:
Prior to attempting an installation, you should make sure that everything
of value on the target system has been backed up. While installing OpenBSD
does not necessarily wipe out all the partitions on the hard disk, errors
during the install process can have unforeseen consequences and you will
probably render the system unbootable if you start, but do not complete
the installation. Having the installation media for the prior installation,
be it a Solaris or OpenBSD CD-ROM or OpenBSD install diskettes is good
insurance if you want to be able to "go back" for some reason.
After taking care of all that, bring your system down gracefully using
the shutdown(8) and/or halt(8) commands. This will get you to the monitor
prompt.
Booting from Floppy Disk installation media:
ok boot floppy bsd
This will cause the kernel contained in the floppy to be booted.
Please note that PCI systems are not able to boot from floppy; also,
Ultra 1, 1E and 2 systems might need a firmware update to be able to boot
from floppy; refer to the ``Updating your firmware'' section earlier in
this document for details.
Booting From CD-ROM installation media:
ok boot cdrom
If the boot is successful, you will get a loader version message,
executable sizes and then the Kernel copyright and device probe
messages. Boot failure modes are typically a lot of CD-ROM drive
activity, but no messages or complaints about magic numbers,
checksums or formats.
Booting from disk:
Boot the miniroot by typing the appropriate command at the PROM:
ok boot disk:b bsd
If you've loaded the miniroot onto some other disk than the default
drive 0, modify the boot specifier accordingly, keeping in mind the
partition naming a=0, b=1...
ok boot disk1:b bsd # example - scsi target 1 or
# second ide drive
During the boot, the kernel might not be able to determine by itself
which device it has been booted from. In this case, it will ask you
for the root and swap devices. Answer the device and partition you
booted from as the root partition (likely sd0b or wd0b); you might
want to rely on the boot messages to find the correct device name
(see below). When the kernel asks your for the swap device, just
validate the suggested device name; since the installation procedure
does not use swap, it doesn't matter.
Installing using a diskless setup:
First, you must setup a diskless client configuration on a server. If
you are using a OpenBSD system as the boot-server, have a look at the
diskless(8) manual page for guidelines on how to proceed with this.
If the server runs another operating system, you'll have to consult
documentation that came with it (on SunOS systems, add_client(8) and
the Sun System/Networks administrators guide constitute a good start;
on Solaris systems, share(1M) is a good starting point as well).
Boot your workstation from the server by entering the appropriate `boot'
command at the monitor prompt:
ok boot net bsd.rd
Installing using the Floppy, CD-ROM, miniroot or netboot procedure:
You should now be ready to install OpenBSD.
The following is a walk-through of the steps you will take while
getting OpenBSD installed on your hard disk. If any question has a
default answer, it will be displayed in brackets ("[]") after the
question. If you wish to stop the installation, you may hit Control-C
at any time, but if you do, you'll have to begin the installation
process again from scratch. Using Control-Z to suspend the process
may be a better option, or at any prompt enter '!' to get a shell,
from which 'exit' will return you back to that prompt (no refresh
of the prompt though).
Boot your machine from the installation media as described above.
It will take a while to load the kernel especially from a floppy
or slow network connection, most likely more than a minute. If
some action doesn't eventually happen, or the spinning cursor has
stopped and nothing further has happened, either your boot media
is bad, your diskless setup isn't correct, or you may have
a hardware or configuration problem.
Once the kernel has loaded, you will be presented with the
OpenBSD kernel boot messages. You will want to read them
to determine your disk's name and geometry. Its name will
be something like "sd0" or "wd0" and the geometry will be
printed on a line that begins with its name. As mentioned
above, you will need your disk's geometry when creating
OpenBSD partitions. You will also need to know the device
name to tell the install tools what disk to install on. If
you cannot read the messages as they scroll by, do not
worry -- you can get at this information later inside the
install program.
While booting, you will probably see several warnings. You
may be warned that the kernel can't figure out what device
it booted from. Do not be alarmed, this is completely normal.
This warning occurs because while OpenBSD/sparc64 can boot from
the floppy drive, the kernel itself lacks a floppy driver.
On some machines, you might also get this kind of warning:
"No counter-timer -- using %tick at 179MHz as system clock."
Unless the frequency displayed does not match your CPU speed,
this is nothing to worry about.
You will next be asked for your terminal type. If you are
installing from a keyboard/monitor console, the default of
"sun" if correct. If you are installing from a serial console
you should choose the terminal type from amongst those listed.
(If your terminal type is xterm, just use vt100).
After entering the terminal type you will be asked whether you
wish to do an "(I)nstall" or an "(U)pgrade". Enter 'I' for a
fresh install or 'U' to upgrade an existing installation.
You will be presented with a welcome message and asked if
you really wish to install (or upgrade). Assuming you
answered yes, the install program will then tell you which
disks of that type it can install on, and ask you which it
should use. The name of the disk is typically "sd0" for
SCSI drives.
Reply with the name of your disk.
Next the disk label which defines the layout of the OpenBSD
file systems must be set up. The installation script will
invoke an interactive editor allowing you to do this. Note
that partition 'c' inside this disk label should ALWAYS
reflect the entire disk, including any non-OpenBSD portions.
If you are labeling a new disk, you will probably start
out with an 'a' partition that spans the disk. In this
case you should delete 'a' before adding new partitions.
The root file system should be in partition 'a', and swap
is usually in partition 'b'.
It is recommended that you create separate partitions for /usr,
/tmp and /var, and if you have room for it, one for /home. In
doing this, remember to skip 'c', leaving it as type "unused".
For help in the disk label editor, enter '?' or 'M' to view the
manual page (see the info on the ``-E'' flag).
The swap partition (usually 'b') should have a type of "swap", all
other native OpenBSD partitions should have a type of "4.2BSD".
Block and fragment sizes are usually 8192 and 1024 bytes, but can
also be 4096 and 512 or even 16384 and 2048 bytes.
The install program will now label your disk and ask which file
systems should be created on which partitions. It will auto-
matically select the 'a' partition to be the root file system.
Next it will ask for which disk and partition you want a file
system created on. This will be the same as the disk name (e.g.
"sd0") with the letter identifying the partition (e.g. "d")
appended (e.g. "sd0d"). Then it will ask where this partition is
to be mounted, e.g. /usr. This process will be repeated until
you enter "done".
At this point you will be asked to confirm that the file system
information you have entered is correct, and given an opportunity
to change the file system table. Next it will create the new file
systems as specified, OVERWRITING ANY EXISTING DATA. This is the
point of no return.
After all your file systems have been created, the install program
will give you an opportunity to configure the network. The network
configuration you enter (if any) can then be used to do the install
from another system using HTTP or FTP, and will also be the
configuration used by the system after the installation is complete.
If you select to configure the network, the install program will
ask you for a name of your system and the DNS domain name to use.
Note that the host name should be without the domain part, and that
the domain name should NOT include the host name part.
Next the system will give you a list of network interfaces you can
configure. For each network interface you select to configure, it
will ask for the IP address to use, the symbolic host name to use,
the netmask to use and any interface-specific flags to set. The
interface-specific flags are usually used to determine which media
the network card is to use. Typically no media flags are required
as autodetection normally works, but you will be prompted with a
list of the acceptable media flags, and asked if you want to provide
any. In doubt, do not enter any media flags; or you can refer to
the manual page for your interface for the appropriate flags.
After all network interfaces has been configured the install pro-
gram will ask for a default route and IP address of the primary
name server to use. You will also be presented with an opportunity
to edit the host table.
At this point you will be allowed to edit the file system table
that will be used for the remainder of the installation and that
will be used by the finished system, following which the new file
systems will be mounted to complete the installation.
After these preparatory steps have been completed, you will be
able to extract the distribution sets onto your system. There
are several install methods supported; FTP, HTTP, tape,
CD-ROM, or a local disk partition.
Note that installation from floppies is not currently supported.
To install via FTP:
To begin an FTP install you will need the following
pieces of information. Don't be daunted by this list;
the defaults are sufficient for most people.
1) Proxy server URL if you are using a URL-based
ftp proxy (squid, CERN ftp, Apache 1.2 or higher).
You need to define a proxy if you are behind a
firewall that blocks outgoing ftp (assuming you
have a proxy available to use).
2) Do you need to use active mode ftp? By default,
ftp will attempt to use passive mode and fall
back to an active connection if the server does
not support passive mode. You only need to enable
this option if you are connecting to a buggy ftp
daemon that implements passive ftp incorrectly.
Note that you will not be asked about active
ftp if you are using a proxy.
3) The IP address (or hostname if you enabled
DNS earlier in the install) of an ftp server
carrying the OpenBSD 3.3 distribution.
If you don't know, just hit return when
asked if you want to see a list of such hosts.
4) The ftp directory holding the distribution sets.
The default value of pub/OpenBSD/3.3/sparc64
is almost always correct.
5) The login and password for the ftp account.
You will only be asked for a password for
non-anonymous ftp.
For instructions on how to complete the installation via
ftp, see the section named "Common URL installations" below.
To install via HTTP:
To begin an HTTP install you will need the following
pieces of information:
1) Proxy server URL if you are using a URL-based
http proxy (squid, CERN ftp, Apache 1.2 or higher).
You need to define a proxy if you are behind a
firewall that blocks outgoing http connections
(assuming you have a proxy available to use).
2) The IP address (or hostname if you enabled
DNS earlier in the install) of an http server
carrying the OpenBSD 3.3 distribution.
If you don't know, just hit return when
asked if you want to see a list of such hosts.
3) The directory holding the distribution sets.
There is no standard location for this;
You should use the directory specified
along with the server in the list of official
http mirror sites that you received in step 3.
For instructions on how to complete the installation via
http, see the section named "Common URL installations" below.
To install from tape:
In order to install from tape, the distribution sets to be
installed must have been written to tape previously, either
in tar format or gzip-compressed tar format.
You will also have to identify the tape device where the
distribution sets are to be extracted from. This will
typically be "nrst0" (no-rewind, raw interface).
Next you will have to provide the file number of the set
that is to be extracted. Note that the file number starts
at 1, which is the first file written to the tape.
The install program will not automatically detect whether
an image has been compressed, so it will ask for that
information before starting the extraction.
To install from CD-ROM:
When installing from a CD-ROM, you will be asked which
device holds the distribution sets. This will typically
be "cd0". Next you will be asked which partition on the
CD-ROM the distribution is to be loaded from. This is
normally partition "a".
Next you will have to identify the file system type that
has been used to create the distribution on the CD-ROM,
this can be either FFS or ISO CD9660. The OpenBSD CD-ROM
distribution uses the CD9660 format.
You will also have to provide the relative path to the
directory on the CD-ROM which holds the distribution, for
the sparc64 this is "3.3/sparc64".
For instructions on how to complete the installation from
the CD-ROM distribution, see the section named "Common
file system installations" below.
To install from a local disk partition:
When installing from a local disk partition, you will
first have to identify which disk holds the distribution
sets. This is normally "wdN" or "sdN" where N is a number
0 through 9. Next you will have to identify the partition
within that disk that holds the distribution, this is a
single letter between 'a' and 'p'.
You will also have to identify the type of file system
residing in the partition identified. Currently, you can
only install from partitions that has been formatted as the
Berkeley fast file system (ffs).
You will also have to provide the relative path to the
directory on the file system where the distribution sets
are located. Note that this path should not be prefixed
with a '/'.
For instructions on how to complete the installation from
the a local disk partition, see the next section.
Common file system installations:
The following instructions are common to installations
from mounted disk partitions and CD-ROMs.
A list of available distribution sets will be listed.
You may individually select distribution sets to install
or enter `all' to install all of the sets (which is what
most users will want to do). You may also enter `list'
to get a file list or `done' when you are done selecting
distribution sets. You may also use wildcards in place of
a file name, e.g. `*.tgz' or even `base*|comp*'. It is
also possible to enter an arbitrary filename and have it
treated as a file set.
Once you have selected the file sets you want to install
and entered `done' you will be prompted to verify that
you really do want to extract file sets. Assuming you
acquiesce, the files will begin to extract. If not, you
will be given the option of installing sets via one of
the other install methods.
Common URL installations:
Once you have entered the required information, the
install program will fetch a file list and present
a list of all the distribution sets that were found
in the specified directory. (If no valid sets were found,
you will be notified and given the option of unpacking
any gzipped tar files found or getting a file list if
none were found.)
At this point you may individually select distribution
sets to install or enter `all' to install all of the
sets (which is what most users will want to do). You
may also enter `list' to get a file list or `done' when
you are done selecting distribution sets. You may also
use wildcards in place of a file name, e.g. `*.tgz' or
even `base*|comp*'. It is also possible to enter an
arbitrary filename and have it treated as a file set.
Once you have selected the file sets you want to install
and entered `done' you will be prompted to verify that
you really do want to download and install the files.
Assuming you acquiesce, the files will begin to download
and unpack. If not, you will be given the option of
installing sets via one of the other install methods.
When all the selected distribution sets has been extracted, you
will be allowed to select which time zone your system will be
using, all the device nodes needed by the installed system will
be created for you and the file systems will be unmounted. For
this to work properly, it is expected that you have installed
at least the "base33", "etc33", and "bsd" distribution sets.
After completing an installation:
Now try a reboot. (If needed, swap your scsi id's first).
The UltraSPARC OpenFirmware will normally load the kernel from the device
and filename as instructed by the ``boot-device'' and ``boot-file''
variables. If the ``boot-file'' variable is empty, the OpenBSD bootloader
will look for a kernel named ``bsd'', unless a different filename has been
specified in the boot command. To reset this variable to its default,
empty, value, type the following:
ok set-default boot-file
Congratulations, you have successfully installed OpenBSD 3.3. When you
reboot into OpenBSD, you should log in as "root" at the login prompt.
You should create yourself an account and protect it and the "root" account
with good passwords. You should have got a mail from the install program we
recommend you to read, it contains answers to basic questions you might
have about OpenBSD (like setting up your system, installing packages, getting
more information about OpenBSD, sending in your dmesg output and more).
This you can do by running
mail
and then just enter "more 1" to get the first message. You quit mail by
entering "q".
Some of the files in the OpenBSD 3.3 distribution might need to be
tailored for your site. We recommend you run:
man afterboot
which will tell you about a bunch of the files needing to be reviewed.
If you are unfamiliar with UN*X-like system administration, it's
recommended that you buy a book that discusses it.
If you will be running your OpenBSD system from a serial console, you may
need to edit /etc/ttys and change the terminal type, and getty method from
"sun" and "suncons" to "vt100" and "std.9600" or something similar. Also
when running from a serial console, you may wish to adjust the eeprom
settings for input-device, output-device, screen-#columns, and screen-#rows
as appropriate.
In order to use 'tip' on OpenBSD/sparc64, you'll need to edit /etc/ttys
and add "local" to the end of the tty configuration line, and run
'ttyflags -a' to put your changes into effect.
Installing from Solaris:
You need a machine running under Solaris to install OpenBSD. You will
also need at least the following pieces:
- the *.tgz files you want to install (as a minimum, base33.tgz and
etc33.tgz)
- gunzip (GNU gzip) Solaris binary
- a boot block file from a Solaris machine that matches your machine type,
for ufs filesystem, such as /usr/platform/`uname -i`/lib/fs/ufs/bootblk
- an OpenBSD kernel
All these pieces, except the boot block and the GNU utilities are supplied
in the OpenBSD/sparc64 distribution.
You need to format and partition the disk using Solaris (since
OpenBSD/sparc64 uses Sun compatible disk labels.) Give yourself adequate
partition sizes. Here is an example layout:
solaris# prtvtoc -s /dev/rdsk/c0t1d0s2
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 80000 79999 /
1 3 01 80000 256000 335999
2 5 00 0 4165271 4165270
3 7 00 336000 100000 435999 /tmp
4 7 00 436000 100000 535999 /var
5 7 00 536000 400000 935999 /var/tmp
6 4 00 936000 3229271 4165270 /usr
Use Solaris to newfs the partitions which will have filesystems on them.
(OpenBSD's filesystem format is almost identical to Solaris).
solaris# newfs /dev/rdsk/c0t1d0s0
[... lots of output]
Repeat for any other partition (in this example, /dev/rdsk/c0t1d0s3,
/dev/rdsk/c0t1d0s4, /dev/rdsk/c0t1d0s5 and /dev/rdsk/c0t1d0s6).
NOTE: If you are able to, there is a performance benefit from
newfs'ing using OpenBSD. If you newfs using the OpenBSD newfs command,
be sure to use the -O flag for your / partition, so that newfs will
use the 4.3BSD filesystem format, rather than the new 4.4BSD filesystem
format. If you forget, you will not be able to boot -- the Solaris boot
blocks do not understand the extended 4.4BSD filesystem format.
Mount those partitions in a tree formation, under /mnt; ie:
solaris# df -k
Filesystem kbytes used avail capacity Mounted on
[...]
/dev/dsk/c0t1d0s0 38427 0 38427 0% /mnt
/dev/dsk/c0t1d0s3 48249 0 48249 0% /mnt/tmp
/dev/dsk/c0t1d0s4 48249 0 48249 0% /mnt/var
/dev/dsk/c0t1d0s5 193536 0 193536 0% /mnt/var/tmp
/dev/dsk/c0t1d0s6 1564024 0 1564024 0% /mnt/usr
Place the boot block in /mnt (your new root partition), and use the Solaris
command "installboot" to make it work.
The installboot man page says to do something like this:
solaris# cp /usr/platform/`uname -i`/lib/fs/ufs/bootblk /mnt/bootblk
solaris# sync; sync
solaris# /usr/sbin/installboot /mnt/bootblk /dev/rdsk/c0t1d0s0
You can now extract the provided "*.tgz files onto your disk.
solaris# ls -FC
base33.tgz etc33.tgz misc33.tgz xserv33.tgz
bsd game33.tgz xbase33.tgz xshare33.tgz
comp33.tgz man33.tgz xfont33.tgz
solaris# gunzip < base33.tgz | (cd /mnt; tar xvpf -)
[...] for each set
And finally copy the OpenBSD kernel onto your disk.
solaris# cp bsd /mnt/bsd
The GNU gunzip program is not distributed as part of Solaris, but may be
present in your /usr/local/bin. If not, you will need to obtain it from a
GNU archive and install before proceeding.
After the files have been extracted, setup /mnt/etc/fstab to match
your actual disk layout. (Minus the "/mnt" component of each path, of
course :-)
Now proceed to reboot the machine and the customize your installation.
Net Boot or Diskless Setup Information:
The set up is similar to the diskless setup, but not identical, because
the Sun setup assumes that the bootblocks load a kernel image, which then
uses NFS to access the exported root partition, while the OpenBSD bootblocks
use internal NFS routines to load the kernel image directly from the
exported root partition.
Please understand that no one gets this right the first try, since
there is a lot of setup and all the host daemons must be running and
configured correctly. If you have problems, extract the diskless(8)
manpage, find someone who's been through it before and use the host
syslog and tcpdump(8) to get visibility of what's happening (or not).
Your UltraSPARC expects to be able to download a second stage bootstrap
program via TFTP after having acquired its IP address through RevARP when
instructed to boot "over the net". It will look for a filename composed of
the machine's IP address. For example, a machine which has been assigned IP
address 130.115.144.11, will make an TFTP request for `8273900B'.
Normally, this file is a symbolic link to an appropriate second-stage
boot program, which should be located in a place where the TFTP daemon
can find it (remember, many TFTP daemons run in a chroot'ed environment).
You can find the boot program in `/usr/mdec/boot' in the OpenBSD/sparc64
distribution.
After the boot program has been loaded into memory and given control by
the PROM, it starts locating the machine's remote root directory through
the BOOTPARAM protocol. First a BOOTPARAM WHOAMI request is broadcast
on the local net. The answer to this request (if it comes in) contains
the client's name. This name is used in next step, a BOOTPARAM GETFILE
request -- sent to the server that responded to the WHOAMI request --
requesting the name and address of the machine that will serve the client's
root directory, as well as the path of the client's root on that server.
Finally, this information (if it comes in) is used to issue a REMOTE MOUNT
request to the client's root filesystem server, asking for an NFS file
handle corresponding to the root filesystem. If successful, the boot
program starts reading from the remote root filesystem in search of the
kernel which is then read into memory.
You will want export the miniroot33.fs filesystem to the client. You
can dd this filesystem image to some spare partition, mount and export
that partition or use tar to copy the contents to a more convenient spot.
Alternatively you can build a bootable partition from the distribution sets
as follows:
Unpack `base33.tgz' and `etc33.tgz' on the server in the root directory
for your target machine. If you elect to use a separately NFS-mounted
filesystem for `/usr' with your diskless setup, make sure the "./usr" base
files in base33.tgz end up in the correct location. One way to do this is
to temporarily use a loopback mount on the server, re-routing <root>/usr to
your server's exported OpenBSD "/usr" directory. Also put the kernel and
the install/upgrade scripts into the root directory.
A few configuration files need to be edited:
<root>/etc/hosts
Add the IP addresses of both server and client.
<root>/etc/myname
This files contains the client's hostname; use the same
name as in <root>/etc/hosts.
<root>/etc/fstab
Enter the entries for the remotely mounted filesystems.
For example:
server:/export/root/client / nfs rw 0 0
server:/export/exec/sparc64.OpenBSD /usr nfs rw 0 0
Now you must populate the `/dev' directory for your client. If the server
runs SunOS 4.x, you can simply change your working directory to `<root>/dev'
and run the MAKEDEV script: `sh MAKEDEV all' (this might require the edition
of MAKEDEV to change the PATH for it to work properly).
On Solaris (SunOS 5.x) systems, MAKEDEV can also be used, but there'll be
error messages about unknown user and groups. These errors are
inconsequential for the purpose of installing OpenBSD. However, you may
want to correct them if you plan to the diskless setup regularly. In that
case, you may re-run MAKEDEV on your OpenBSD machine once it has booted.
Upgrading a previously-installed OpenBSD System:
------------------------------------------------
Warning! Upgrades to OpenBSD 3.3 are currently only supported from the
immediately previous release. The upgrade process will also work with older
releases, but might not execute some migration tasks that would be necessary
for a proper upgrade. The best solution, whenever possible, is to backup
your data and reinstall from scratch.
To upgrade OpenBSD 3.3 from a previous version, start with the general
instructions in the section "Installing OpenBSD".
Boot from CD-ROM, the miniroot, or the installation floppy.
When prompted, select the (U)pgrade option rather than the (I)nstall
option at the prompt in the install process.
The upgrade script will ask you for the existing root partition, and
will use the existing filesystems defined in /etc/fstab to install the
new system in. It will also use your existing network parameters.
From then, the upgrade procedure is very close to the installation
procedure described earlier in this document. Note that the upgrade
procedure will not let you pick the ``etc33.tgz'' set, so as to
preserve your files in `/etc' which you are likely to have customized
since a previous installation.
However, it is strongly advised that you unpack the etc33.tgz set in
a temporary directory and merge changes by hand, since all components of
your system may not function correctly until your files in `/etc' are
updated.
Getting source code for your OpenBSD System:
--------------------------------------------
Now that your OpenBSD system is up and running, you probably want to get
access to source code so that you can recompile pieces of the system.
A few methods are provided. If you have an OpenBSD CD-ROM, the source code
is provided. Otherwise, you can get the pieces over the Internet using
ANONCVS, CTM or FTP. For more information, see
http://www.openbsd.org/anoncvs.html
http://www.openbsd.org/ctm.html
http://www.openbsd.org/ftp.html
Using online OpenBSD documentation:
-----------------------------------
Documentation is available if you first install the manual
distribution set. Traditionally, the UN*X "man pages" (documentation)
are denoted by 'name(section)'. Some examples of this are
intro(1),
man(1),
apropos(1),
passwd(1),
passwd(5) and
afterboot(8).
The section numbers group the topics into several categories, but three
are of primary interest: user commands are in section 1, file formats
are in section 5, and administrative information is in section 8.
The 'man' command is used to view the documentation on a topic, and is
started by entering 'man [section] topic'. The brackets [] around the
section should not be entered, but rather indicate that the section is
optional. If you don't ask for a particular section, the topic with the
least-numbered section name will be displayed. For instance, after
logging in, enter
man passwd
to read the documentation for passwd(1). To view the documentation for
passwd(5), enter
man 5 passwd
instead.
If you are unsure of what man page you are looking for, enter
apropos subject-word
where "subject-word" is your topic of interest; a list of possibly
related man pages will be displayed.
Adding third party software; ``packages'' and ``ports'':
-------------------------------------------------------
As complete as your OpenBSD system is, you may want to add any of several
excellent third party software applications. There are several ways to do
this. You can:
1) Obtain the source code and build the application based
upon whatever installation procedures are provided with the
application.
2) Use the OpenBSD ``ports'' collection to automatically get any
needed source file, apply any required patches, create the
application, and install it for you.
3) Use the OpenBSD ``package'' collection to grab a pre-compiled
and tested version of the application for your hardware.
If you purchased the OpenBSD CD-ROM set you already have several popular
``packages'', and the ``ports'' collection.
Instructions for installing applications from the various sources using
the different installation methods follow.
You should also refer to the packages(7) manual page.
Installing applications from the CD-ROM package collection:
The OpenBSD CD-ROM ships with several applications pre-built
for various hardware architectures. The number of applications
vary according to available disk space. Check the directory
3.3/packages/sparc64 to see which packages are available for
your hardware architecture. That directory will be on the same
CD-ROM containing the OS installation files for your architecture.
To install one or more of these packages you must:
1) become the superuser (root).
2) mount the appropriate CD-ROM.
3) use the ``pkg_add'' command to install the software.
Example (in which we use su(1) to get superuser privileges, thus
you have to be in group "wheel", see the manual page for su(1)).
$ su
Password: <enter your root password>
# mkdir -p /cdrom
# mount /dev/cd0a /cdrom
# pkg_add /cdrom/OSREV/packages/MACHINE_ARCH/<package-name>
# <add more packages if desired>
# umount /cdrom
Package names are usually the application name and version
with .tgz appended, e.g. emacs-20.7.tgz
Installing applications from the ftp.openbsd.org package collection:
All available packages for your architecture have been placed on
ftp.openbsd.org in the directory pub/OpenBSD/3.3/packages/sparc64/
You may want to peruse this to see what packages are available. The
packages are also on the OpenBSD FTP mirror sites. See
http://www.openbsd.org/ftp.html
for a list of current ftp mirror sites.
Installation of a package is very easy.
1) become the superuser (root)
2) use the ``pkg_add'' command to install the software
``pkg_add'' is smart enough to know how to download the software
from the OpenBSD ftp server. Example:
$ su
Password: <enter your root password>
# pkg_add \
ftp://ftp.openbsd.org/pub/OpenBSD/3.3/packages/sparc64/emacs-20.7.tgz
Packages available include (at least):
9menu-1.5.tgz 9wm-1.2pre.tgz
ATI-4.2.0.15.tgz BasiliskII-0.9.1.tgz
BitchX-1.0c18.tgz Business-CreditCard-0.21.tgz
ImageMagick-5.2.9.tgz ORBit-0.5.13.tgz
ORBit2-2.4.4.tgz R-1.4.1.tgz
STk-3.1.1.tgz TclXML-1.2.1.tgz
Tktable-2.7.tgz Wnn-data-4.2.tgz
Wnn-xwnmo-4.2.tgz XPostitPlus-2.3.tgz
Xaw3d-1.5.tgz XawMu-1.5.tgz
a2ps-4.13b-a4.tgz a2ps-4.13b-letter.tgz
aalib-1.2-no_x11.tgz aalib-1.2.tgz
abcde-2.0.3.tgz abiword-1.0.4.tgz
abook-0.4.17.tgz abs-0.8.tgz
abuse-2.0.tgz ac3dec-0.6.1.tgz
adcomplain-3.52.tgz aescrypt-0.7.tgz
aewm-1.2.0.tgz afm-1.0.tgz
afternoonstalker-1.0.2.tgz afterstep-1.8.9.tgz
aggregate-1.5.tgz agrep-2.04.tgz
aide-0.7.tgz amanda-2.4.2.2.tgz
amanda-client-2.4.2.2.tgz amaya-5.1-motif.tgz
amaya-english-dict-19961207.tgz amaya-french-dict-19961217.tgz
amph-0.8.10.tgz an-0.93.tgz
analog-5.24.tgz angband-2.9.3-no_x11.tgz
angband-2.9.3.tgz angst-0.4b.tgz
antiword-0.33.tgz ap-utils-1.3.tgz
apc-upsd-19991128.tgz apg-2.1.0.tgz
arc-5.21e.tgz archie-1.4.1.tgz
ari-yahoo-1.7.tgz arirang-1.6.tgz
arpcatch-19970824.tgz arpd-0.1.tgz
arping-1.06.tgz arpwatch-2.1a11.tgz
arts-1.1.tgz arts-gmcop-1.1.tgz
asapm-2.11.tgz ascd-0.13.2.tgz
asclock-2.0.12-classic-english.tgz asfiles-1.0.tgz
asmail-0.56.tgz asp2php-0.76.13-no_x11.tgz
asp2php-0.76.13.tgz aspell-0.33.7p1.tgz
aspell-br-0.33.7p1.tgz aspell-ca-0.33.7p1.tgz
aspell-da-0.33.7p1.tgz aspell-de-0.33.7p1.tgz
aspell-eo-0.33.7p1.tgz aspell-es-0.33.7p1.tgz
aspell-fo-0.33.7p1.tgz aspell-fr-0.33.7p1.tgz
aspell-it-0.33.7p1.tgz aspell-nl-0.33.7p1.tgz
aspell-no-0.33.7p1.tgz aspell-pl-0.33.7p1.tgz
aspell-pt-0.33.7p1.tgz aspell-ru-0.33.7p1.tgz
aspell-sv-0.33.7p1.tgz astime-2.8.tgz
astrolog-5.30.tgz astyle-1.15.3.tgz
aterm-0.4.2-big5-lite.tgz aterm-0.4.2-big5.tgz
aterm-0.4.2-lite.tgz aterm-0.4.2.tgz
atk-1.0.3.tgz atlas-0.4.3.1.tgz
aub-2.0.5.tgz august-0.63b.tgz
aumix-2.8.tgz autobook-1.2.tgz
autoconf-2.13p0.tgz autoconf-2.52p0.tgz
automake-1.4-p6p1.tgz autossh-1.2d.tgz
axe-6.1.2.tgz axyftp-0.5.1p1.tgz
baekmuk-fonts-2.0.tgz balance-2.33.tgz
base64-1.0.tgz bash-1.14.7p1-static.tgz
bash-1.14.7p1.tgz bash-2.05b-static.tgz
bash-2.05b.tgz bbdate-0.2.3.tgz
bbkeys-0.8.4.tgz bbpager-0.3.1.tgz
bchunk-1.1.1.tgz bclock-1.0.tgz
beav-1.40.15.tgz beaver-0.2.3.tgz
belt-1.18.tgz bfbtester-2.0.1.tgz
bibelot-0.9.4.tgz bibview-2.2.tgz
bind-lib-9.2.2rc1.tgz bind-server-9.2.2rc1.tgz
bing-1.0.4p1.tgz binutils-2.11.2.tgz
binutils-2.12.tgz bison-1.35.tgz
bk2site-1.1.8.tgz blackbox-0.65.0.tgz
bladeenc-0.94.2p1.tgz blast-1.0.tgz
bluefish-0.7.tgz bmf-0.9.4.tgz
bnc-2.8.4.tgz bochs-2.0.1-debug.tgz
bochs-2.0.1.tgz boehm-gc-6.1p1.tgz
bombermaze-0.6.6.tgz bonk-0.6.tgz
bonnie-1.0.tgz bonobo-1.0.22.tgz
bonobo-activation-1.0.4.tgz bonobo-conf-0.16.tgz
bonobo-docs-1.0.22.tgz bottlerocket-0.04c.tgz
bounix-1.21.tgz boust-0.161.tgz
bricons-3.0.tgz brs-4.00l1.tgz
bsd-airtools-0.2p2.tgz btoa-5.2.1.tgz
bubblemon-1.0.11.tgz bubblemon-dockapp-1.4.tgz
buffer-1.17.1.tgz bulk_mailer-1.13.tgz
burgerspace-1.7.0.tgz bvi-1.3.1.tgz
bzflag-1.7g0.tgz bzip-0.21.tgz
bzip2-1.0.2.tgz c-client-4.53.tgz
c2html-0.9.2.tgz cabextract-0.6.tgz
cadaver-0.20.5.tgz calamaris-2.52.tgz
calc-2.11.6.2.tgz calcoo-1.3.13.tgz
calentool-2.3.tgz cannadict-3.5b2.tgz
cannalib-3.5b2p1.tgz cannaserver-3.5b2p1.tgz
castle-combat-0.7.2.tgz catdoc-0.91.4-tk.tgz
catdoc-0.91.4.tgz cbb-0.73.tgz
ccache-2.1.1.tgz ccrypt-1.3-emacs21.tgz
ccrypt-1.3.tgz cdparanoia-3.a9.8.tgz
cdrchive-1.0.1.tgz cdrdao-1.1.7.tgz
cdrtools-2.0.tgz centericq-4.7.7.tgz
cfs-1.3.3.tgz cftp-0.12.tgz
cgicc-3.2.1.tgz cgichk-3.6.tgz
cgiparse-0.9b.tgz cgoban-1.9.12.tgz
chbg-1.5.tgz check-0.8.4.tgz
chora-1.1.tgz chrootuid-1.3.tgz
cidr-2.3.tgz circuit-0.1.4.tgz
clisp-2.27.tgz clo++-0.3.0.tgz
clog-1.6.tgz cmail-3.1.tgz
colorls-3.2.tgz common-1.0.6.tgz
compface-1.0.tgz conserver-5.21.tgz
contool-3.3a.tgz control-center-1.4.0.5.tgz
control-center2-2.0.3.tgz cook-2.21.tgz
cooledit-3.17.2-python.tgz cooledit-3.17.2.tgz
cops-1.04.tgz coq-7.3.1.tgz
corewars-0.9.12.tgz corkscrew-2.0.tgz
cosmosmash-1.3.tgz courier-imap-1.7.0.tgz
courier-ldap-1.7.0.tgz courier-mysql-1.7.0.tgz
courier-pgsql-1.7.0.tgz courier-pop3-1.7.0.tgz
courtney-1.3.tgz cowsay-3.03.tgz
cqcam-0.91.tgz crack-5.0.tgz
crank-0.1.4.tgz crawl-0.3.tgz
cronolog-1.6.2.tgz crossfire-client-1.4.0.tgz
cscope-15.3.tgz ctm-19960528.tgz
ctrace-0.8.tgz ctwm-3.6.tgz
cucipop-1.31.tgz curl-7.10.3p1-kerberos.tgz
curl-7.10.3p1.tgz cvs2cl-2.38p1.tgz
cvsgraph-1.2.0.tgz cvsplot-1.6.2.tgz
cvsup-16.1f-no_x11.tgz cvsup-16.1f.tgz
cvsupd-16.1f-no_x11.tgz cvsupd-16.1f.tgz
cvsweb-2.0.6.tgz cyrproxy-1.4.2.tgz
cyrus-sasl-1.5.27p1.tgz cyrus-sasl-2.1.11.tgz
d1489-1.4.tgz dante-1.1.13.tgz
db-3.1.17.tgz dc_gui-0.42.tgz
dclock-pl4.tgz dctc-0.68.0.tgz
ddclient-3.6.2.tgz ddd-3.3.tgz
deco-3.8.3.tgz decss-0.0.6.tgz
dejagnu-1.4.2.tgz dejagnu-1.4.3.tgz
dejasearch-1.9.0.tgz delay-1.5.tgz
despoof-0.9.tgz devtodo-0.1.17.tgz
dgpsip-1.32.tgz dhcping-1.2.tgz
dia-0.90.tgz dialog-0.6z.tgz
dillo-0.7.0.tgz disc-cover-1.4.0.tgz
dlint-1.4.0.tgz dnstracer-1.5.tgz
doc++-3.4.9.tgz doc-2.2.3.tgz
docbook-4.1.2.tgz docbook-dsssl-1.72.tgz
dopewars-1.5.7.tgz dsniff-2.3.tgz
dumpmpeg-0.6.tgz dvi2tty-5.3.1.tgz
dxpc-3.8.1.tgz e16keyedit-0.2.tgz
easytag-0.25.tgz eboard-0.7.1pl1a.tgz
eboard-extras-1pl2.tgz echoping-5.0.1.tgz
ectags-5.2.3.tgz ee-1.4.4.tgz
eel-2.0.8.tgz efax-0.9p1.tgz
electricfence-2.0.5.tgz elm-2.4ME+66.tgz
elvis-2.1.4-no_x11.tgz elvis-2.1.4.tgz
emacs-20.7-no_x11.tgz emacs-20.7.tgz
emacs-21.2-no_x11.tgz emacs-21.2.tgz
emacs-leim-20.7.tgz emacs-leim-21.2.tgz
emiclock-2.0.2.tgz enigma-0.50.tgz
enjoympeg-0.4.1.tgz enlightenment-0.16.5.tgz
enscript-1.6.3-a4.tgz enscript-1.6.3.tgz
epic4-1.0.1.tgz erlang-47.4.0.tgz
es-0.9b1.tgz esound-0.2.28.tgz
eterm-0.8.10-kanji.tgz eterm-0.8.10.tgz
ethereal-0.9.11-no_x11.tgz ethereal-0.9.11.tgz
ettercap-0.6.9.tgz everybuddy-0.2.1beta6.tgz
evilwm-0.99.7.tgz evolution-1.2.1.tgz
evolution-devguide-1.2.1.tgz exim-3.36p1-ldap.tgz
exim-3.36p1-mysql.tgz exim-3.36p1-no_x11-ldap.tgz
exim-3.36p1-no_x11-mysql.tgz exim-3.36p1-no_x11-postgresql.tgz
exim-3.36p1-no_x11.tgz exim-3.36p1-postgresql.tgz
exim-3.36p1-no_x11-mysql-postgresql-ldap.tgz
exim-3.36p1.tgz expat-1.95.4.tgz
expect-5.38.0-no_tk.tgz expect-5.38.0.tgz
explorer-0.72.tgz ezm3-1.0.tgz
faces-1.6.1.tgz falconseye-1.9.3.tgz
fastjar-0.93.tgz fetchmail-6.2.0.tgz
ffcall-1.8.tgz fftw-2.1.3.tgz
figlet-2.2.1.tgz fileutils-4.1p1.tgz
findutils-4.1.tgz fire-1.0.tgz
firewalk-0.8.tgz flac-1.0.4.tgz
flash-0.4.10.tgz flawfinder-1.21.tgz
fleditor-0.4.5.tgz flipit-0.3.2.tgz
flow-tools-0.62.tgz fltk-1.1.2.tgz
fluxbox-0.1.14.tgz flvw-1.0.tgz
flwm-1.0.0.tgz fnlib-0.5.tgz
foiltex-2.1.4ap0.tgz fping-2.2b1.tgz
fragroute-1.2p1.tgz fragrouter-1.6.tgz
freebsd_lib-4.0.tgz freeciv-1.13.0-gtk.tgz
freeciv-1.13.0.tgz freefonts-0.10.tgz
freetds-0.60p1.tgz freetype-1.3.1.tgz
freetype-doc-1.3.1.tgz freeze-2.5.tgz
frodo-4.1bp1.tgz frotz-2.32.tgz
fsv-0.9.tgz ftdi-eeprom-1.1.tgz
fuse-0.5.1.tgz fuse-utils-0.5.1.tgz
fvicons-2.4.14.tgz fvwm2+fvicons-2.4.14-i18n.tgz
fvwm2+fvicons-2.4.14.tgz fvwm2-2.4.14-i18n.tgz
fvwm2-2.4.14.tgz fvwm95-2.0.43a.tgz
fxtv-1.03.tgz g++-3.2.2.tgz
g77-3.2.2.tgz gabber-0.8.7.tgz
gacc-0.7.5.tgz gail-0.17.tgz
gaim-0.59.8-esd.tgz gaim-0.59.8.tgz
gal-0.22.tgz garmin-utils-1.7.tgz
gawk-3.1.1.tgz gcc-3.2.2.tgz
gconf-1.0.9.tgz gconf2-1.2.1.tgz
gcpio-2.5.tgz gd-1.8.3.tgz
gdbm-1.8.3.tgz gdk-pixbuf-0.21.0p1.tgz
gdk-pixbuf-gnome-0.21.0p1.tgz geg-1.0.2.tgz
gemdropx-0.7.tgz gengameng-4.1.tgz
gentoo-0.11.34.tgz getmail-3.1.0.tgz
gettext-0.10.40p1.tgz getxml-1.0.4.tgz
ghostscript-7.05-a4.tgz ghostscript-7.05.tgz
ghostview-1.5.tgz gif2png-2.4.5.tgz
gifsicle-1.30-no_x11.tgz gifsicle-1.30.tgz
giftrans-1.12.tgz gimp-1.2.3.tgz
gindent-2.2.8.tgz gkrellaclock-0.1.tgz
gkrellkam-0.3.4.tgz gkrellm-1.2.13p1.tgz
gkrellm-reminder-0.3.5.tgz gkrellm-volume-0.8.tgz
gkrellm-wireless-0.2.2.tgz gkrellmms-0.5.5.tgz
gkrellmss-0.4.tgz gkrellshoot-0.3.2.tgz
gkrellstock-0.4.tgz gkrellweather-0.2.7.tgz
glade-0.6.4-gnome.tgz glade-0.6.4.tgz
gle-3.0.4.tgz glib-1.2.10.tgz
glib2-2.0.7.tgz glib2-docs-2.0.7.tgz
glimmer-1.2.1.tgz glimpse-4.1.tgz
glut-3.7.tgz gmake-3.80.tgz
gmp-4.1.1.tgz gnat-3.2.2.tgz
gnats-3.113.1.tgz gnocatan-0.6.1.tgz
gnome-applets-1.4.0.5.tgz gnome-applets2-2.0.4.tgz
gnome-applets2-battstat-2.0.4.tgz gnome-core-1.4.0.6.tgz
gnome-desktop-2.0.10.tgz gnome-libs-1.4.2.tgz
gnome-mime-data-2.0.0.tgz gnome-panel-2.0.11.tgz
gnome-print-0.36.tgz gnome-session-2.0.9.tgz
gnome-terminal-2.0.2.tgz gnome-users-guide-1.2.tgz
gnome-vfs-1.0.5.tgz gnome-vfs2-2.0.4.1.tgz
gnomemm-1.2.3.tgz gnomemm-docs-1.2.3.tgz
gnuchess-4.0.80.tgz gnugo-3.2.tgz
gnuls-4.1.tgz gnupg-1.2.1.tgz
gnushogi-1.2.3.tgz gnut-0.4.28.tgz
gobjc-3.2.2.tgz gofer-2.30a.tgz
gogo-2.26a.tgz golem-0.0.5.tgz
gone-1.3.2a.tgz gpa-0.4.3.tgz
gperf-2.7.2.tgz gpgme-0.3.14.tgz
gphoto-0.4.3.tgz gq-0.5.0.tgz
gqmpeg-0.16.0.tgz gqview-1.2.0.tgz
grace-5.1.11.tgz gracula-3.0.tgz
graphviz-1.7.6.tgz grepmail-4.80.tgz
grip-3.0.0.tgz grpn-1.1.2.tgz
gsl-0.6.tgz gsm-1.0.10.tgz
gtar-1.13.25p1-static.tgz gtar-1.13.25p1.tgz
gthumb-0.13p1.tgz gtimer-1.1.5.tgz
gtk+-1.2.10p1.tgz gtk+2-2.0.9.tgz
gtk+2-docs-2.0.9.tgz gtk+extra-0.99.17.tgz
gtk-engines-0.12.tgz gtk-engines2-1.9.0.tgz
gtk-gnutella-0.91.1.tgz gtk-theme-switch-1.0.1.tgz
gtkballs-2.2.0.tgz gtkglarea-1.2.2.tgz
gtkhtml-1.1.7.tgz gtkmm-1.2.10.tgz
gtkmm-docs-1.2.10.tgz gtkpool-0.5.0.tgz
gtksee-0.5.0.tgz gtop-1.0.13.tgz
gtypist-2.6.2.tgz guavac-1.2.tgz
guile-1.4.tgz guilib-1.1.1.tgz
gv-3.5.8p3.tgz gwenview-0.16.2.tgz
ha-0.999b.tgz hackdata-3.4.1.tgz
hanterm-fonts-3.1.tgz hanterm-xf-p19.tgz
hc-1.1.tgz help2man-1.29.tgz
heroes-0.21-sdl.tgz hevea-1.05.tgz
hexcalc-19951219.tgz hexcurse-1.54.tgz
hexedit-1.2.2.tgz hgrep-19991004.tgz
hlfl-0.52.tgz hnb-1.8.1.tgz
hoc-1.1.tgz horde-2.1.tgz
hping-2.0.0rc1.tgz html2wml-0.4.9.tgz
htmldoc-1.8.23.tgz http_load-20020104.tgz
http_ping-20020403.tgz httptunnel-3.3.tgz
hugs98-Dec2001.tgz hydra-2.2.tgz
hylafax-4.1.5-a4.tgz hylafax-4.1.5.tgz
hypermail-2.1.7-gdbm.tgz hypermail-2.1.7.tgz
icb-5.0.9p1.tgz icebreaker-1.2.1.tgz
icecast-1.3.12.tgz icewm-1.0.9.2.tgz
ickle-0.3.2.tgz icmpinfo-1.11.tgz
icon-compiler-9.4-no_x11.tgz icon-compiler-9.4.tgz
icon-interp-9.4-no_x11.tgz icon-interp-9.4.tgz
icon-lib-9.4-no_x11.tgz icon-lib-9.4.tgz
id-utils-3.2d.tgz id3ed-1.10.4.tgz
id3lib-3.8.0.tgz idiff-1.0.tgz
idled-1.16.tgz imap-uw-2002.336-plaintext.tgz
imap-uw-2002.336.tgz imlib-1.9.14.tgz
imm-3.5a1.tgz imp-3.1.tgz
impress-1.1b9.tgz indexpage-1.0.3.tgz
ines-1.2.tgz info2html-1.1.tgz
integrit-3.02.00.tgz intel2gas-1.3.3.tgz
intltool-0.23.tgz iodbc-2.50.3.tgz
ion-20020207.tgz iozone-3.83.tgz
ipcad-2.6.2.tgz ipcheck-0.157.tgz
iperf-1.2.tgz ipfm-0.11.4.tgz
iplog-2.2.3.tgz ipv6calc-0.45.tgz
irc-2.10.3p1.tgz ircII-20030314.tgz
irssi-0.8.6-socks.tgz irssi-0.8.6.tgz
irssi-icb-0.14.tgz isc-dhcp-3.0.1rc11.tgz
isearch-1.14.tgz isic-0.05.tgz
isilo-2.58.tgz iso12083-1993.tgz
iso8879-1986.tgz ispell-3.2.06.tgz
ispell-dutch-3.2.06.tgz ispell-french-3.2.06.tgz
ispell-german-3.2.06.tgz ispell-portuguese-3.2.06.tgz
ispell-russian-3.2.06.tgz ispell-slovak-3.2.06.tgz
ispell-spanish-3.2.06.tgz ispell-swedish-3.2.06.tgz
isync-0.8.tgz iview-1.4.tgz
ja-Wnn-4.2.tgz ja-Wnndict-4.2.tgz
ja-fonts-funet-19911117.tgz ja-fonts-gnu-1.2.tgz
ja-groff-1.10_0.99.tgz ja-jvim-2.0r-canna.tgz
ja-jvim-2.0r-wnn-canna.tgz ja-jvim-2.0r-wnn.tgz
ja-jvim-2.0r.tgz ja-kinput2-3.0-canna-wnn.tgz
ja-kinput2-3.0-canna.tgz ja-kinput2-3.0-wnn.tgz
ja-kterm-6.2.0p1-xaw3d.tgz ja-kterm-6.2.0p1.tgz
ja-less-3.32p2.48.tgz ja-nkf-1.92.tgz
ja-onew-canna-2.2.10.tgz ja-onew-wnn4-2.2.10.tgz
ja-onew-wnn4-canna-2.2.10.tgz ja-w3m-0.3.2.2-image.tgz
ja-w3m-0.3.2.2.tgz jadetex-3.11.tgz
jakarta-ant-1.5.1.tgz jakarta-servletapi-3.2.4.tgz
jakarta-tomcat-3.2.4.tgz jakarta-tomcat-4.0.6.tgz
jam-2.4.tgz jbigkit-1.2.tgz
jday-1.3.tgz jed-0.99.14-no_x11.tgz
jed-0.99.14.tgz jesred-1.2.1.tgz
jftpgw-0.12.0.tgz jikes-1.15.tgz
jlint-2.3.tgz joe-2.9.8pre1p1.tgz
john-1.6p1-k6.tgz john-1.6p1.tgz
jove-4.16.tgz jpeg-6b.tgz
jpilot-0.99.2.tgz js-0.2.5.tgz
junit-3.7.tgz junkbuster-2.0.2p1.tgz
kaffe-1.0.6.tgz kakasi-2.3.1.tgz
kanjips-19900310.tgz kbanner-2.tgz
kbiff-3.6.3.tgz kdbg-1.2.5.tgz
kde-i18n-af-3.1.tgz kde-i18n-ar-3.1.tgz
kde-i18n-bg-3.1.tgz kde-i18n-bs-3.1.tgz
kde-i18n-ca-3.1.tgz kde-i18n-cs-3.1.tgz
kde-i18n-da-3.1.tgz kde-i18n-de-3.1.tgz
kde-i18n-el-3.1.tgz kde-i18n-en_GB-3.1.tgz
kde-i18n-eo-3.1.tgz kde-i18n-es-3.1.tgz
kde-i18n-et-3.1.tgz kde-i18n-eu-3.1.tgz
kde-i18n-fa-3.1.tgz kde-i18n-fi-3.1.tgz
kde-i18n-fr-3.1.tgz kde-i18n-he-3.1.tgz
kde-i18n-hu-3.1.tgz kde-i18n-it-3.1.tgz
kde-i18n-ja-3.1.tgz kde-i18n-lt-3.1.tgz
kde-i18n-mt-3.1.tgz kde-i18n-nb-3.1.tgz
kde-i18n-nl-3.1.tgz kde-i18n-nn-3.1.tgz
kde-i18n-nso-3.1.tgz kde-i18n-pl-3.1.tgz
kde-i18n-pt-3.1.tgz kde-i18n-pt_BR-3.1.tgz
kde-i18n-ro-3.1.tgz kde-i18n-ru-3.1.tgz
kde-i18n-sk-3.1.tgz kde-i18n-sl-3.1.tgz
kde-i18n-sr-3.1.tgz kde-i18n-sv-3.1.tgz
kde-i18n-ta-3.1.tgz kde-i18n-th-3.1.tgz
kde-i18n-tr-3.1.tgz kde-i18n-uk-3.1.tgz
kde-i18n-ven-3.1.tgz kde-i18n-vi-3.1.tgz
kde-i18n-xh-3.1.tgz kde-i18n-zh_CN-3.1.tgz
kde-i18n-zh_TW-3.1.tgz kde-i18n-zu-3.1.tgz
kdeaddons-3.1.tgz kdeartwork-3.1.tgz
kdebase-3.1.tgz kdebindings-3.1.tgz
kdeedu-3.1.tgz kdegames-3.1.tgz
kdegraphics-3.1.tgz kdelibs-3.1.tgz
kdelibs-doc-3.1.tgz kdemultimedia-3.1.tgz
kdenetwork-3.1.tgz kdepim-3.1.tgz
kdesdk-3.1.tgz kdetoys-3.1.tgz
kdeutils-3.1.tgz kdirstat-2.2.0.tgz
kdoc-2.0a54.tgz kermit-8.0.206.tgz
keychain-2.0.2.tgz klaxon-1.5.tgz
klogic-1.404.tgz klone-2.1a.tgz
kmplayer-0.6.4.tgz ko-Wnn-4.2.tgz
ko-Wnndict-4.2.tgz koffice-1.2.1p0.tgz
koffice-i18n-af-1.2.1.tgz koffice-i18n-ar-1.2.1.tgz
koffice-i18n-bs-1.2.1.tgz koffice-i18n-cs-1.2.1.tgz
koffice-i18n-da-1.2.1.tgz koffice-i18n-de-1.2.1.tgz
koffice-i18n-el-1.2.1.tgz koffice-i18n-en_GB-1.2.1.tgz
koffice-i18n-eo-1.2.1.tgz koffice-i18n-es-1.2.1.tgz
koffice-i18n-et-1.2.1.tgz koffice-i18n-fr-1.2.1.tgz
koffice-i18n-he-1.2.1.tgz koffice-i18n-hu-1.2.1.tgz
koffice-i18n-it-1.2.1.tgz koffice-i18n-ja-1.2.1.tgz
koffice-i18n-lt-1.2.1.tgz koffice-i18n-lv-1.2.1.tgz
koffice-i18n-mt-1.2.1.tgz koffice-i18n-nb-1.2.1.tgz
koffice-i18n-nl-1.2.1.tgz koffice-i18n-nn-1.2.1.tgz
koffice-i18n-pl-1.2.1.tgz koffice-i18n-pt-1.2.1.tgz
koffice-i18n-pt_BR-1.2.1.tgz koffice-i18n-ru-1.2.1.tgz
koffice-i18n-sk-1.2.1.tgz koffice-i18n-sl-1.2.1.tgz
koffice-i18n-sv-1.2.1.tgz koffice-i18n-th-1.2.1.tgz
koffice-i18n-tr-1.2.1.tgz koffice-i18n-uk-1.2.1.tgz
koffice-i18n-ven-1.2.1.tgz koffice-i18n-xh-1.2.1.tgz
koffice-i18n-zh_TW-1.2.1.tgz koffice-i18n-zu-1.2.1.tgz
konqueror-20020311p1.tgz kpilot-3.1.tgz
kronolith-1.0.tgz kslide-0.90.tgz
ksmp3play-0.5.1.tgz ktail-0.6.1.tgz
ktimeclock-2.0.2.tgz kxmleditor-0.7.2.tgz
l0phtcrack-2.52.tgz l2a-1.2.tgz
lablgtk-1.2.5.tgz lam-6.5.1.tgz
lame-3.93.1.tgz larswm-7.2.8.tgz
latex2html-97.1.tgz lbreakout2-2.2.2.tgz
lcms-1.08.tgz leafnode-1.9.35.tgz
lesstif-0.92.6.tgz lftp-2.6.4.tgz
lgeneral-0.5.0.tgz lgrind-3.67.tgz
lha-1.14i.tgz lib765-0.3.0.tgz
libIDL-0.8.0.tgz liba52-0.7.4.tgz
libao-0.8.3.tgz libao-arts-0.8.3.tgz
libao-esd-0.8.3.tgz libart-2.3.10.tgz
libaudiofile-0.2.3.tgz libavl-1.4.0.tgz
libbind-9.2.2rc1.tgz libbio-2.0.tgz
libbonobo-2.0.0.tgz libbonoboui-2.0.3.tgz
libcdaudio-0.99.6.tgz libdivxdecore-0.4.7.tgz
libdnd-1.1.tgz libdnet-1.5.tgz
libdockapp-0.4.0.tgz libdsk-0.9.9.tgz
libdvdread-0.9.4.tgz libexif-0.5.9.tgz
libfmt-2.0.tgz libggi-2.0.2.tgz
libghttp-1.0.9.tgz libgii-0.8.2.tgz
libglade-0.17-gnome.tgz libglade-0.17.tgz
libglade2-2.0.1.tgz libglade2-convert-2.0.1.tgz
libgnome-2.0.6.tgz libgnomecanvas-2.0.5.tgz
libgnomeui-2.0.6.tgz libgtkhtml-2.0.3.tgz
libgtop-1.0.13-gnome.tgz libgtop-1.0.13.tgz
libgtop2-2.0.0.tgz libiconv-1.8.tgz
libicq2000-0.3.2.tgz libident-0.22.tgz
libmcrypt-2.5.5.tgz libmikmod-3.1.10p2-esd.tgz
libmikmod-3.1.10p2.tgz libmng-1.0.4.tgz
libnet-1.0.2a.tgz libnids-1.16.tgz
libogg-1.0.tgz libproplist-0.10.1.tgz
libregexp9-2.0.tgz librep-0.13.4.tgz
libretto-config-1.0b5.tgz librsvg-2.0.1.tgz
libsidplay-1.36.57.tgz libsigc++-1.0.4.tgz
libslang-1.4.6.tgz libsndfile-1.0.4.tgz
libspectrum-0.1.0.tgz libst-1.4.tgz
libstdc++-3.2.2.tgz libtool-1.3.5p3.tgz
libungif-4.1.0b1.tgz libunicode-0.4.tgz
libusb-0.1.7.tgz libuta-0.3.40.tgz
libutf-2.0.tgz libutf8-0.7.3.tgz
libvorbis-1.0.tgz libwmf-0.2.6.tgz
libwnck-0.18.tgz libworkman-1.4.tgz
libxml-2.4.28.tgz libxml1-1.8.17.tgz
libxslt-1.0.22.tgz libzvt-2.0.1.tgz
linc-0.5.5.tgz lincity-1.11.tgz
lincvs-0.4.90.tgz linkchecker-1.6.4.tgz
links+-2.1pre7d-no_x11.tgz links+-2.1pre7d.tgz
links-0.98.tgz linleech-2.2.1.tgz
linuxdoc-1.1.tgz lmbench-1.1.tgz
login_ldap-3.3.tgz logjam-4.0.1.tgz
logsentry-1.1.1p0.tgz logsurfer-1.5b.tgz
lopster-1.0.1-dev5.12p1.tgz lq-sp-1.3.4.9.tgz
lrzsz-0.12.20.tgz lsof-4.66.tgz
lua-4.0.tgz lupe-0.08.tgz
lxnb-0.4.tgz lyx-1.2.3.tgz
lzo-1.08.tgz lzop-1.00.tgz
m4-1.4.tgz mac-robber-1.00.tgz
mad-0.14.2b.tgz magicpoint-1.09ap1.tgz
mailcrypt-3.5.7-emacs-gnupg.tgz maildrop-1.4.0.tgz
mailman-2.1.1-postfix.tgz mailman-2.1.1.tgz
mailutil-uw-2002.336-plaintext.tgz mailutil-uw-2002.336.tgz
makeself-1.5.5.tgz malsync-2.0.6.tgz
maradns-1.0.13.tgz maradns-1.1.06.tgz
mastergear-1.4.tgz mawk-1.3.3.tgz
mboxgrep-0.7.4.tgz mcrypt-2.6.3.tgz
mcsim-4.2.0.tgz mencal-2.0.tgz
mergemaster-1.26.tgz metaauto-0.1.tgz
metacity-2.4.5.tgz metamail-2.7.tgz
mgdiff-1.0.tgz mhash-0.8.17.tgz
mhonarc-2.6.0.tgz mico-2.3.6.tgz
micq-0.4.10.tgz migrationtools-44.tgz
mindterm-2.1.tgz minicom-2.00.0p1.tgz
mirror-2.9.tgz mixer.app-1.8.0.tgz
mk-2.0.tgz mm-1.2.1.tgz
mmv-1.01b.tgz mod_auth_mysql-3.2.tgz
mod_auth_radius-1.5.2.tgz mod_dav-1.0.3.tgz
mod_frontpage-1.6.2.tgz mod_gzip-1.3.19.1a.tgz
mod_perl-1.27.tgz monit-3.1.tgz
moon-buggy-0.5.1.tgz moria-5.5.2.tgz
most-4.9.2.tgz mouseclock-1.0.tgz
movemail-1.0.tgz mowitz-0.2.2.tgz
mp3blaster-3.1.3.tgz mp3cddb-0.1.tgz
mp3encode-1.10.tgz mp3info-0.2.16.tgz
mpack-1.5p1.tgz mpeg_lib-1.3.1.tgz
mpeg_play-2.4.tgz mpegaudio-3.9.tgz
mpg123-0.59r-esd.tgz mpg123-0.59r.tgz
mpg321-0.2.10.tgz mplayer-0.90rc4-no_x11.tgz
mplayer-0.90rc4-sdl-win32-faad.tgz mplayer-0.90rc4.tgz
mplayer-fontmaker-0.90rc4.tgz mplayer-luxi-sans-0.90rc4.tgz
mplayer-luxi-sans-italic-0.90rc4.tgz
mplayer-luxi-sans-bold-0.90rc4.tgz mplex-1.1.tgz
mrtd-2.2.2a.tgz mrtg-2.9.12a.tgz
mterm-0.4.2a.tgz mtools-3.9.8.20021118.tgz
mtr-0.49.tgz mudix-4.3.tgz
mutt-1.4.1i.tgz mutt-1.5.4i.tgz
mxconns-3.1.4.tgz mycalendar-1.5.tgz
mysql++-1.7.9.tgz mysql++-docs-1.7.9.tgz
mysql-client-3.23.55.tgz mysql-server-3.23.55.tgz
mysql-tests-3.23.55.tgz mysql2pgsql-20010320.tgz
mysqlcc-0.8.9.tgz mysqlgui-1.7.5.tgz
nag-1.0.tgz nail-10.4.tgz
nam-1.0a8.tgz named-xfer-8.3.3.tgz
nano-1.2.0-slang.tgz nano-1.2.0.tgz
nap-1.5.1p1.tgz nasm-0.98.35.tgz
nautilus-2.0.8.tgz nbaudit-1.0.tgz
nbtscan-1.0.2.tgz ncftp-3.1.5.tgz
ndiff-0.04.tgz neXtaw-0.13.0.tgz
nedit-5.3rc1.tgz nemesis-1.32.tgz
neon-0.23.5.tgz nessus-1.2.7-no_x11.tgz
nessus-1.2.7.tgz netatalk-1.5.3.1.tgz
netatalk-990130.tgz netcdf-3.5b3.tgz
nethack-3.4.1-no_x11.tgz nethack-3.4.1-qt.tgz
nethack-3.4.1.tgz netpbm-9.24.tgz
netperf-2.2alpha.tgz netpipe-2.4.tgz
netpipes-4.2-export.tgz netris-0.5.tgz
newsfetch-1.21.tgz newvox-1.0.tgz
nfsshell-1.0.tgz ngrep-1.40.tgz
nmap-3.00-no_x11.tgz nmap-3.00.tgz
nmh-1.0.4p1.tgz no-ip-1.6.tgz
normalize-0.7.4.tgz ns-2.1b6.tgz
nscache-0.6.tgz nsd-1.0.2p1.tgz
nslint-2.0.2-static.tgz nslint-2.0.2.tgz
nsping-0.8.tgz nspmod-0.1.tgz
nte-1.7.0.tgz ntl-5.3.1.tgz
ntop-1.1.tgz ntp-4.1.1c.tgz
ntp-4.1.74.tgz ntp-doc-4.1.1c.tgz
ntp-doc-4.1.74.tgz nulib-3.25.tgz
nut-1.2.1.tgz nut-cgi-1.2.1.tgz
nvi-m17n-1.79.19991117-canna.tgz nvi-m17n-1.79.19991117.tgz
oaf-0.6.10.tgz ocaml-3.06.tgz
octave-2.0.16.tgz ogle-0.9.0.tgz
ogle_gui-0.9.0.tgz oidentd-2.0.5.tgz
oinkmaster-0.6.tgz okle-0.2.3.tgz
olvwm-4.2.tgz omega-0.90.4.tgz
openbox-2.2.3.tgz opencm-0.1.0alpha18pl2.tgz
openjade-1.3.tgz openldap-client-2.0.27.tgz
openldap-server-2.0.27.tgz openmotif-2.1.30.5.tgz
openmotif-debuglibs-2.1.30.5.tgz openmotif-demos-2.1.30.5.tgz
opennap-0.44.tgz openwebmail-1.81.tgz
oproute-0.7p1.tgz otcl-1.0a7.tgz
outguess-0.2.tgz p0f-1.8.2.tgz
p5-AI-NeuralNet-BackProp-0.89.tgz p5-AI-NeuralNet-Mesh-0.44.tgz
p5-AI-Perceptron-0.01.tgz p5-Algorithm-Diff-1.15.tgz
p5-Algorithm-MDiff-0.94.tgz p5-Algorithm-MarkovChain-0.03.tgz
p5-Algorithm-Permute-0.04.tgz p5-Apache-ASP-2.51.tgz
p5-Apache-MP3-3.03.tgz p5-ApacheDBI-0.88.tgz
p5-Archive-Tar-0.22.tgz p5-Archive-Zip-1.05.tgz
p5-AsciiDB-TagFile-1.06.tgz p5-Audio-CD-0.04.tgz
p5-Authen-Radius-0.05.tgz p5-B-Graph-0.51.tgz
p5-BSD-Resource-1.15.tgz p5-Bit-Vector-6.3.tgz
p5-Blatte-0.9.4.tgz p5-Blatte-HTML-0.9.tgz
p5-C-Scan-0.74.tgz p5-CDDB-1.08.tgz
p5-CDDB_get-2.11.tgz p5-CGI-Deurl-1.08.tgz
p5-CGI-SpeedyCGI-2.21.tgz p5-CGI-XMLApplication-1.1.1.tgz
p5-Cache-Cache-1.01.tgz p5-Chatbot-Eliza-0.97.tgz
p5-Class-Container-0.08.tgz p5-Class-Data-Inheritable-0.02.tgz
p5-Class-Date-1.1.5.tgz p5-Class-Loader-2.02.tgz
p5-Class-MethodMaker-1.10.tgz p5-Compress-LZO-1.08.tgz
p5-Compress-Zlib-1.19.tgz p5-Config-IniFiles-2.27.tgz
p5-Convert-ASN1-0.16.tgz p5-Convert-BER-1.3101.tgz
p5-Convert-TNEF-0.17.tgz p5-Convert-UUlib-0.31.tgz
p5-Crypt-Blowfish-2.09.tgz p5-Crypt-CBC-2.08.tgz
p5-Crypt-DES-2.03.tgz p5-Crypt-OpenSSL-DSA-0.10.tgz
p5-Crypt-RC4-2.02.tgz p5-Crypt-Rijndael-0.05.tgz
p5-Crypt-SSLeay-0.45.tgz p5-Crypt-TripleDES-0.24.tgz
p5-Crypt-Twofish-2.12.tgz p5-Curses-1.06.tgz
p5-CursesWidgets-1.997.tgz p5-DBD-Msql-Mysql-1.22.19-dbimon.tgz
p5-DBD-Msql-Mysql-1.22.19.tgz p5-DBD-Pg-1.01.tgz
p5-DBD-mysqlPP-0.04.tgz p5-DBI-1.30.tgz
p5-DBIx-XHTML_Table-1.14.tgz p5-Data-Flow-0.05.tgz
p5-Data-ShowTable-3.3.tgz p5-Date-Calc-5.3.tgz
p5-Date-Handler-1.0.tgz p5-DateManip-5.40.tgz
p5-Devel-SmallProf-0.9.tgz p5-Devel-StackTrace-1.02.tgz
p5-Digest-HMAC-1.01.tgz p5-Digest-Nilsimsa-0.06.tgz
p5-Digest-SHA1-2.01.tgz p5-Error-0.15.tgz
p5-Exception-Class-1.07.tgz p5-Expect-1.15.tgz
p5-File-ReadBackwards-0.97.tgz p5-File-Tail-0.98.tgz
p5-Filesys-DiskSpace-0.05.tgz p5-Finance-Quote-1.07.tgz
p5-Font-AFM-1.18.tgz p5-Font-TTF-0.32.tgz
p5-FreezeThaw-0.43.tgz p5-GD-1.41p1.tgz
p5-GD-Barcode-1.13.tgz p5-GD-Graph-1.35.tgz
p5-GD-Graph3d-0.61.tgz p5-GD-TextUtil-0.83.tgz
p5-Gateway-0.42.tgz p5-GnuPG-0.09.tgz
p5-GnuPG-Interface-0.31.tgz p5-Graphics-ColorNames-0.31.tgz
p5-Gtk-0.7008-gtkglarea.tgz p5-Gtk-0.7008.tgz
p5-HTML-Base-0.6.tgz p5-HTML-CGIChecker-0.90.tgz
p5-HTML-Embperl-1.3.3.tgz p5-HTML-Format-1.23.tgz
p5-HTML-FromText-1.005.tgz p5-HTML-Mason-1.15.tgz
p5-HTML-Parser-3.26.tgz p5-HTML-Stream-1.54.tgz
p5-HTML-Table-1.17.tgz p5-HTML-TableExtract-1.08.tgz
p5-HTML-Tagset-3.03.tgz p5-HTML-Template-2.6.tgz
p5-HTML-Template-Expr-0.04.tgz p5-HTML-Tree-3.16.tgz
p5-HTTP-GHTTP-1.07.tgz p5-HTTPD-Log-Filter-1.07.tgz
p5-I18N-Charset-1.21.tgz p5-IO-Interface-0.97.tgz
p5-IO-Socket-Multicast-0.25.tgz p5-IO-Socket-SSL-0.91.tgz
p5-IO-String-1.01.tgz p5-IO-Tty-1.02.tgz
p5-IO-Zlib-1.01.tgz p5-IO-stringy-2.108.tgz
p5-IPC-ShareLite-0.08.tgz p5-Image-Info-1.11.tgz
p5-Image-Size-2.991.tgz p5-Imager-0.39.tgz
p5-Libxml-0.07.tgz p5-Locale-PGetText-0.16.tgz
p5-MD5-1.7.tgz p5-MIME-Lite-2.117.tgz
p5-MIME-Types-1.005.tgz p5-MIME-tools-5.411a.tgz
p5-MLDBM-2.01.tgz p5-MLDBM-Sync-0.30.tgz
p5-MP3-ID3v1Tag-1.11.tgz p5-MP3-Info-1.01.tgz
p5-Mail-Alias-1.12.tgz p5-Mail-Audit-2.1.tgz
p5-Mail-Box-2.018.tgz p5-Mail-IMAPClient-2.2.5.tgz
p5-Mail-POP3Client-2.9.tgz p5-Mail-SpamAssassin-2.50.tgz
p5-Mail-Tools-1.15.tgz p5-Math-FFT-0.25.tgz
p5-Math-GMP-2.03.tgz p5-Mon-0.11.tgz
p5-Net-DNS-0.33.tgz p5-Net-DNS-SEC-0.08.tgz
p5-Net-Daemon-0.37.tgz p5-Net-IP-1.15.tgz
p5-Net-IPv4Addr-0.10.tgz p5-Net-IRC-0.73.tgz
p5-Net-MySQL-0.08.tgz p5-Net-ParseWhois-0.62.tgz
p5-Net-Pcap-0.04.tgz p5-Net-Ping-External-0.06.tgz
p5-Net-RawIP-0.09d.tgz p5-Net-SNMP-4.0.3.tgz
p5-Net-SSLeay-1.19.tgz p5-Net-Server-0.84.tgz
p5-Net-Telnet-3.03.tgz p5-Net-Telnet-Cisco-1.10.tgz
p5-Net-Traceroute-1.05.tgz p5-Net-Whois-1.9.tgz
p5-News-Article-1.13.tgz p5-News-Newsrc-1.08.tgz
p5-Number-Format-1.45.tgz p5-Object-Realize-0.09.tgz
p5-PGP-Sign-0.17-pgp.tgz p5-PGP-Sign-0.17-pgp5.tgz
p5-PGP-Sign-0.17.tgz p5-Palm-1.3.0.tgz
p5-Parallel-ForkManager-0.7.4.tgz p5-Params-Validate-0.24.tgz
p5-Parse-RecDescent-1.80.tgz p5-PerlMagick-5.2.9.tgz
p5-PlRPC-0.2016.tgz p5-Quota-1.4.6.tgz
p5-SMTP-Server-1.1.tgz p5-SNMP_Session-0.94.tgz
p5-SQL-Statement-0.1020.tgz p5-Scalar-List-Utils-1.0701.tgz
p5-Set-IntSpan-1.07.tgz p5-Set-Scalar-1.17.tgz
p5-String-Approx-3.18.tgz p5-String-CRC32-1.2.tgz
p5-String-Random-0.198.tgz p5-String-Scanf-2.0.tgz
p5-String-ShellQuote-1.00.tgz p5-String-Similarity-0.02.tgz
p5-Term-ReadKey-2.21.tgz p5-Term-ReadLine-Gnu-1.13.tgz
p5-Term-Screen-1.02.tgz p5-Term-ScreenColor-1.08.tgz
p5-Text-Autoformat-1.04.tgz p5-Text-Iconv-1.2.tgz
p5-Text-PDF-0.23.tgz p5-Text-Template-1.43.tgz
p5-Text-Unidecode-0.04.tgz p5-Tie-DBI-0.91.tgz
p5-Time-Period-1.20.tgz p5-Time-Piece-1.07.tgz
p5-Time-TimeDate-1.14.tgz p5-Tk-800.024.tgz
p5-Tk-demo-800.024.tgz p5-URI-1.22.tgz
p5-Unicode-Map8-0.12.tgz p5-Unicode-String-2.06.tgz
p5-Unix-Syslog-0.97.tgz p5-WML-Card-0.02.tgz
p5-XML-Checker-0.13.tgz p5-XML-DOM-1.41.tgz
p5-XML-LibXML-1.51.tgz p5-XML-LibXSLT-1.50.tgz
p5-XML-NamespaceSupport-1.08.tgz p5-XML-Parser-2.31.tgz
p5-XML-RSS-0.97.tgz p5-XML-RegExp-0.03.tgz
p5-XML-SAX-0.11.tgz p5-XML-Sablotron-0.97.tgz
p5-XML-Simple-1.08.tgz p5-XML-Writer-0.4.tgz
p5-XML-XPath-1.12.tgz p5-XML-XSLT-0.32.tgz
p5-ldap-0.26.tgz p5-libapreq-1.0.tgz
p5-libvorbis-0.04.tgz p5-libwww-5.65.tgz
p5-sdf-2.001.tgz p5-sybperl-2.15.tgz
palm-bookmarks-0.2.tgz palmpower-1.0.2.tgz
pan-0.13.3.tgz pango-1.0.5.tgz
par-1.52.tgz paragui-0.7.2.tgz
parse-1.0.tgz pavuk-0.9pl28a-no_x11.tgz
pavuk-0.9pl28a.tgz pcapmerge-1.0.tgz
pccts-1.33r33.tgz pchar-1.4.tgz
pcre-3.9.tgz pcsc-lite-1.0.1.tgz
pdflib-4.0.3.tgz pdmenu-1.2.69.tgz
pdnsd-1.1.7a.tgz pekwm-0.1.1.tgz
pen-0.9.5.tgz perltidy-20010328.tgz
pflogsumm-1.0.7.tgz pfm-1.87.2.tgz
pfstat-1.3.tgz pftop-0.3.tgz
pgp-2.6.3.tgz pgp-5.0i.tgz
pgpdump-0.17.tgz pgpsendmail-1.4.5.tgz
phoon-20020326.tgz php4-bz2-4.2.3.tgz
php4-core-4.2.3p1.tgz php4-curl-4.2.3.tgz
php4-dba-4.2.3.tgz php4-dbase-4.2.3.tgz
php4-domxml-4.2.3.tgz php4-extensions-4.2.3.tgz
php4-filepro-4.2.3.tgz php4-gd-4.2.3.tgz
php4-gmp-4.2.3.tgz php4-imap-4.2.3.tgz
php4-ldap-4.2.3.tgz php4-mcrypt-4.2.3.tgz
php4-mhash-4.2.3.tgz php4-mysql-4.2.3.tgz
php4-ncurses-4.2.3.tgz php4-odbc-4.2.3.tgz
php4-pdf-4.2.3.tgz php4-pear-4.2.3.tgz
php4-pgsql-4.2.3.tgz php4-shmop-4.2.3.tgz
php4-snmp-4.2.3.tgz php4-sybase_ct-4.2.3.tgz
php4-xml-4.2.3.tgz php4-xslt-4.2.3.tgz
pi-address-0.4.0.tgz pico-4.4.tgz
piewm-1.03.tgz pilot-2.0.tgz
pilot-link-0.9.5p1.tgz pilrc-2.8.5-no_x11.tgz
pilrc-2.8.5.tgz pine-4.53.tgz
pkgconfig-0.14.0p1.tgz plan-1.6.1p1.tgz
plor-0.3.2.tgz plushs-1.2.tgz
pm3-1.1.15.tgz png-1.2.5p1.tgz
pngcrush-1.5.8.tgz pop3gwd-1.2.tgz
popclient-3.0b6.tgz poppy-3.1.tgz
popt-1.5.1.tgz pork-0.5.0.tgz
portscanner-1.2.tgz portsentry-1.1.tgz
postfix-2.0.3-20030126-ldap.tgz postfix-2.0.3-20030126-mysql.tgz
postfix-2.0.3-20030126-pcre.tgz postfix-2.0.3-20030126-sasl2.tgz
postfix-2.0.3-20030126.tgz postfix-2.0.5-ldap.tgz
postfix-2.0.5-mysql.tgz postfix-2.0.5-pcre.tgz
postfix-2.0.5-sasl2.tgz postfix-2.0.5.tgz
postfix-2.0.5.tls0.8.13-pcre-sasl2-tls.tgz
postfix-2.0.5.tls0.8.13-sasl2-tls.tgz
postfix-2.0.5.tls0.8.13-tls.tgz postgresql-7.3.2.tgz
postgresql-clients-7.3.2.tgz postgresql-docs-7.3.2.tgz
povray-3.1g-no_x11.tgz povray-3.1g.tgz
ppgen-1.0.tgz ppmtoTbmp-1.1.tgz
pptp-1.1.0.tgz prboom-2.2.3.tgz
prepop-0.1b7.tgz privoxy-3.0.0p0.tgz
procmail-3.22.tgz proctools-0.3.tgz
prosper-1.00.4p0.tgz proxy-suite-1.7.tgz
pspell-0.12.2.tgz pstree-2.17p1.tgz
psutils-1.17-a4.tgz pth-1.4.1.tgz
pure-ftpd-1.0.14-ldap.tgz pure-ftpd-1.0.14-mysql.tgz
pure-ftpd-1.0.14-postgresql.tgz pure-ftpd-1.0.14.tgz
pwm-20010309.tgz py-Chart-1.18.tgz
py-Checker-0.8.11.tgz py-Gtk-1.4.2-gnome.tgz
py-Gtk-1.4.2.tgz py-HappyDoc-2.1.tgz
py-IP-0.41.tgz py-Imaging-1.1.3.tgz
py-Imaging-examples-1.1.3.tgz py-Numeric-22.0.tgz
py-cryptkit-0.9.tgz py-curl-7.9.8.4.tgz
py-dns-2.3.0.tgz py-gnupg-0.3.2.tgz
py-libpcap-0.2.tgz py-mxDateTime-2.0.3.tgz
py-mysql-0.9.2.tgz py-optik-1.3.tgz
py-psycopg-1.0.14-zope.tgz py-psycopg-1.0.14.tgz
py-sslwrapper-0.6.1.tgz py-unit-1.4.1-no_x11.tgz
py-unit-1.4.1.tgz py-xml-0.7.1.tgz
py-zhCodecs-1.2.0.tgz python-2.1.3p1.tgz
python-2.2.1p1.tgz python-expat-2.1.3p1.tgz
python-expat-2.2.1p1.tgz python-mpz-2.1.3p1.tgz
python-mpz-2.2.1p1.tgz python-tests-2.1.3p1.tgz
python-tests-2.2.1p1.tgz python-tkinter-2.1.3p1.tgz
python-tkinter-2.2.1p1.tgz python-tools-2.1.3p1.tgz
python-tools-2.2.1p1.tgz qcad-1.5.4.tgz
qhacc-0.6.1a.tgz qiv-1.8.tgz
qlwm-1.7.tgz qstat-2.4e.tgz
qt-1.45.tgz qt-designer-2.3.2p0.tgz
qt-examples-1.45.tgz qt-html-1.45.tgz
qt2-3.2.tgz qt2-examples-3.2.tgz
qt2-html-3.2.tgz qt3-base-1.1p0.tgz
qt3-html-1.1.tgz qt3-mt-1.1p0.tgz
qt3-mysql-1.1-mt.tgz qt3-postgresql-1.1-mt.tgz
quake-20000101-ggi.tgz quake-20000101-sdl.tgz
quake-20000101.tgz quakeworld-server-20000101.tgz
quanta-3.1.tgz queso-980922.tgz
quirc-0.9.82.tgz qvwm-1.1.8-esound-imlib.tgz
qvwm-1.1.8-esound.tgz qvwm-1.1.8-imlib.tgz
qvwm-1.1.8.tgz r5rs-19980421.tgz
radiusd-cistron-1.6.6.tgz radiusd-lucent-2.1p5.tgz
radiusniff-0.2.tgz radiusreport-0.3b6.tgz
rat-3.0.33.tgz ratpoison-1.1.1.tgz
rats-2.1.tgz razor-agents-2.14.tgz
rc-1.7-editline.tgz rc-1.7-readline.tgz
rc-1.7.tgz rclock-2.7.6.tgz
rdesktop-1.1.0.p19.9.0.tgz rdp-1.0.tgz
recode-3.6.tgz redhat_base-6.2p6.tgz
redhat_motif-2.1.30.tgz relate-2.0.tgz
relaydb-1.0.tgz remind-3.0.22.tgz
rep-gtk-0.15.tgz reportmagic-2.13p1.tgz
rio500-0.7.tgz rman-3.0.9.tgz
root-tail-0.2.tgz rox-filer-1.3.6.tgz
roxirc-1.8.tgz rplay-3.3.2.tgz
rpm-3.0.6p1.tgz rpm2cpio-1.2.tgz
rrdtool-1.0.40-tcl.tgz rrdtool-1.0.40.tgz
rsync-2.5.6.tgz rtty-4.0.tgz
ruby-1.6.8.tgz ruby-gdk-imlib-0.31.tgz
ruby-gdk-pixbuf-0.31.tgz ruby-gtk-0.31.tgz
ruby-ncurses-0.6.tgz ruby-pcap-0.6.tgz
rxp-1.2.3.tgz rxvt-2.6.4.tgz
s10sh-0.2.0.tgz sablotron-0.97.tgz
safecat-1.9.tgz sam-4.3.19980506.tgz
samba-2.2.8.tgz sarien-0.7.0.tgz
sash-3.6.tgz sattrack-3.1.6.tgz
sawfish-0.36.tgz sc-7.15.tgz
scanlogd-2.2.tgz scanssh-1.6b.tgz
scli-0.2.12.tgz scm-5d3-no_x11.tgz
scm-5d3.tgz screen-3.9.13-static.tgz
screen-3.9.13.tgz scrollkeeper-0.3.11.tgz
scsh-0.6.2.tgz sdd-1.31.tgz
sdl-1.2.5-esd.tgz sdl-1.2.5-sun.tgz
sdl-image-1.2.2.tgz sdl-mixer-1.2.4.tgz
sdl-net-1.2.4.tgz sdl-ttf-2.0.5.tgz
sdlmm-0.1.8.tgz sdlroids-1.3.4.tgz
sdlzombies-1.0.0.tgz sdr-2.7e.tgz
ser-0.8.10.tgz setquota-0.1.tgz
seyon-2.14b.tgz sgmlformat-1.7.tgz
sh-utils-2.0.tgz shared-mime-info-0.9.tgz
sharity-light-1.2.tgz sharutils-4.2.1.tgz
shash-0.2.4-static.tgz shash-0.2.4.tgz
shorten-3.5.1.tgz shtool-1.6.1.tgz
siag-3.5.5.tgz sidplay-1.0.9.tgz
silc-client-0.9.11.tgz silc-server-0.9.12.tgz
simh-2.10-2.tgz sing-1.1p1.tgz
siphon-0.666.tgz sipsak-0.7.7.tgz
sirc-2.211.tgz skill-4.1p2.tgz
slash-3.2.2-e8-no_x11.tgz slash-3.2.2-e8.tgz
slash-em-3.3.1.6e4f8-no_x11.tgz slash-em-3.3.1.6e4f8.tgz
slib-2c9.tgz sliderule-1.0.tgz
slirp-1.0c.tgz slrn-0.9.7.4.tgz
slurpie-2.0b.tgz sma-1.3.2.tgz
smbsniff-0.0.1b.tgz smlnj-110.0.7.tgz
smokeping-1.16.tgz smpeg-0.4.4.tgz
smtpclient-1.0.0.tgz smurflog-2.1.tgz
snes9x-1.37c.tgz sniffit-0.3.7b.tgz
snit-0.7.tgz snort-1.9.1.tgz
socket-1.1.tgz solid-pop3d-0.15.tgz
solid-pop3d-0.15p1-apop.tgz soundtracker-0.6.6-esd.tgz
soundtracker-0.6.6-gnome-esd.tgz soundtracker-0.6.6.tgz
soup-0.7.10.tgz source-highlight-1.5.tgz
sox-12.17.3.tgz sp-1.3.4.tgz
speak_freely-7.1.tgz spectemu-0.94.tgz
speyes-1.2.0.tgz spice-3f5.tgz
spider-1.1.tgz spiff-1.0.tgz
spim-6.4.tgz splint-3.0.1.6.tgz
splitvt-1.6.3.tgz sqlat-1.0.0.tgz
sqsh-2.1.tgz squeak-3.0.tgz
squid-2.5.STABLE1.tgz ssldump-0.9b3.tgz
sslsniffer-1.21.tgz star-1.4.3-static.tgz
star-1.4.3.tgz starlanes-1.2.2.tgz
stat-1.3.tgz stel-19960505.tgz
streamripper-1.0.5.tgz strobe-1.06.tgz
stunnel-4.04.tgz sunclock-3.50pre1.tgz
surfraw-1.0.7.tgz swatch-3.0.1.tgz
swig-1.3.11.tgz swig-examples-1.3.11.tgz
swisswatch-0.06.tgz sylpheed-0.8.10.tgz
symon-2.58.tgz symon-mon-2.58.tgz
symon-mux-2.58.tgz symon-web-2.58.tgz
synaesthesia-2.1-esd.tgz sysgen.tgz
syslog-ng-1.4.17.tgz syslog-ng-1.5.24.tgz
t1lib-1.3.1.tgz tacacs+-4.0.4a.tgz
task-1.52.tgz taxipilot-0.7.2.tgz
tcl-8.0.5.tgz tcl-8.3.5.tgz
tclcl-1.0b11.tgz tcllib-1.3.tgz
tcpblast-1.0.tgz tcpcat-1.2.0.tgz
tcpflow-0.20.tgz tcplist-2.2.tgz
tcpreen-1.2.0.tgz tcpreplay-1.0.1.tgz
tcpshow-1.74.tgz tcpslice-1.1a3.tgz
tcpstat-1.4.tgz tcptrace-6.2.0.tgz
tcptraceroute-1.4p1.tgz tcs-19950325.tgz
tcsh-6.12.00-static.tgz tcsh-6.12.00.tgz
teTeX_base-2.0.1p0.tgz teTeX_texmf-2.0.1.tgz
teapop-0.3.5.tgz ted-2.11.tgz
teknap-1.3g.tgz tempest-1.0.5p1.tgz
tempwatch-1.0.tgz texi2html-1.64.tgz
textutils-2.0.tgz tgif-4.1.40.tgz
thcrut-0.1.tgz thttpd-2.23b1.tgz
tidy-4aug00.tgz tiff-3.5.7.tgz
tiff2png-0.81c.tgz tightvnc-1.2.7-viewer.tgz
tightvnc-1.2.7.tgz tin-1.4.6-nntp_only.tgz
tin-1.4.6.tgz tintin-1.5.6.tgz
tinyfugue-4.0s1p2.tgz tinyproxy-1.5.2.tgz
tircproxy-0.4.5.tgz tk-8.0.5.tgz
tk-8.3.5.tgz tkcron-2.12.tgz
tkcvs-6.0.tgz tkinfo-2.5.tgz
tkirc2.46.tgz tkman-2.1.tgz
tkrat-2.0.3.tgz tmake-1.10.tgz
tmda-0.69.tgz tnef-1.1.1.tgz
toppler-0.96.tgz tosha-0.6.tgz
totd-1.3.tgz tracker-5.3.tgz
trafd-3.0.1.tgz trafshow-3.1.tgz
trans-1.20.tgz transfig-3.2.3d.tgz
transproxy-1.4.tgz treewm-0.4.2.tgz
trn-4.0.76.tgz ttcp-1.12.tgz
ttmkfdir-0.0.tgz ttygrin-0.4.8.tgz
ttyrec-1.0.6.tgz turba-1.1.tgz
tvtwm-0pl11.tgz type1inst-0.6.1.tgz
uae-0.8.21.tgz ubh-2.5.tgz
ucd-snmp-4.2.3.tgz ucl-1.01.tgz
ucpp-1.2.tgz ucspi-unix-0.34.tgz
udptunnel-1.1.tgz uemacs-4.0.tgz
umbrello-1.1.1.tgz unace-1.2b.tgz
unarj-2.43.tgz unclutter-8.tgz
unicon-10.0beta.tgz unison-2.9.1.tgz
unrtf-0.18.1.tgz unzip-5.50.tgz
urlview-0.9.tgz usbutil-0.5.tgz
uucp-1.06.2.tgz validate-1.1.2.tgz
varconf-0.5.4.tgz vat-4.0b2.tgz
vcdimager-0.6.2.tgz vectoroids-1.1.0.tgz
vgb-2.1.tgz vic-2.8ucl4.tgz
vicq-0.4.1.tgz vid-1.0.1p1.tgz
viewfax-2.3.tgz vim-6.1.350-gtk.tgz
vim-6.1.350-no_x11.tgz vim-lang-6.1.350-gtk.tgz
vim-lang-6.1.350-no_x11.tgz viz-1.1.1.tgz
vomit-0.2.tgz vorbis-tools-1.0.tgz
vrfy-99.05.22.tgz vsftpd-1.1.3.tgz
vtun-2.5.tgz w3m-0.3.2.2-image.tgz
w3m-0.3.2.2.20021207-m17n.tgz w3m-0.3.2.2.tgz
w3m-0.3.2.2.20021207-image-m17n.tgz
w3mir-1.0.10.tgz w9wm-0.4.1.tgz
waimea-0.4.0.tgz wampager-0.9.1.tgz
waveplay-20001210.tgz wbd-1.0ucl4.tgz
wdg-sgml-lib-1.1.1.tgz wdiff-0.5.tgz
wdsetup-0.6b.tgz webalizer-2.01.10p1.tgz
weblint-1.020.tgz wget-1.7p1.tgz
whisker-2.1.tgz whowatch-1.4.tgz
wide-dhcp-1.4.0.3.tgz wily-0.13.41.tgz
windowmaker-0.80.2.tgz windowmaker-extra-0.1.tgz
windowmaker-lang-0.80.2.tgz wine-990225.tgz
wmapm-3.1.tgz wmbiff-0.2p.tgz
wmbutton-0.4.tgz wmcalc-0.3.tgz
wmcalclock-1.25.tgz wmclock-1.0.12.2.tgz
wmcube-0.98.tgz wmcube-gdk-0.98p2.tgz
wmdate-0.7.tgz wmfishtime-1.23.tgz
wmglobe-1.3.tgz wmgrabimage-0.72.tgz
wmicons-1.0.tgz wmifinfo-0.06.tgz
wminfo-1.51.tgz wmitime-0.3.tgz
wmix-3.0.tgz wmmail-0.64.tgz
wmmand-1.0.tgz wmmenu-1.2-gdk_pixbuf.tgz
wmmenu-1.2.tgz wmminichess-0.8.tgz
wmmixer-1.0b1.tgz wmmon-1.0b2.tgz
wmmoonclock-1.27.tgz wmmp3-0.12.tgz
wmmultipop3-0.8.tgz wmnet-1.06p1.tgz
wmnetscapekiller-0.3.tgz wmphoto-0.3a.tgz
wmpinboard-1.0.tgz wmpop3-0.5.6a.tgz
wmspaceweather-1.04.tgz wmsun-1.03.tgz
wmtheme-1.3.2.tgz wmthemeinstall-0.62.tgz
wmtictactoe-1.1.1.tgz wmtime-1.0b2.tgz
wmtimer-2.5.tgz wmtune-1.1cp1-zoltrix.tgz
wmtune-1.1cp1.tgz wmtz-0.7.tgz
wmwave-0.4.tgz wmweather-1.31.tgz
wmx-6.tgz workman-1.3a.tgz
wsoundprefs-1.1.1.tgz wsoundserver-0.4.0-esd.tgz
wsoundserver-0.4.0.tgz wterm-6.2.9.tgz
wv-0.7.2.tgz wwwcount-2.5.tgz
wwwoffle-2.5e.tgz wxgtk-2.2.9.tgz
wy60-2.0.6.tgz x2vnc-1.4.tgz
x2x-1.27.tgz x48-0.4.0.tgz
xanim-2.80.1.tgz xantfarm-1.16.tgz
xarchie-2.0.10.tgz xasteroids-5.0.tgz
xautolock-2.1.tgz xbatt-1.2.1.tgz
xbattle-5.4.1.tgz xbill-2.0.tgz
xbl-1.0j.tgz xblast-2.6b.tgz
xbmbrowser-5.1.tgz xboard-4.2.6.tgz
xboing-2.4.tgz xbreaky-0.0.4p1.tgz
xbubble-0.2.tgz xcb-2.4.tgz
xcd-1.6.tgz xcdplayer-2.2.tgz
xcdroast-0.98a13.tgz xcept-2.1.2p1.tgz
xchat-1.8.9.tgz xco-1.3.tgz
xcoloredit-1.2.tgz xcolors-1.3.tgz
xcopilot-0.6.6.tgz xcubes-5.5.2.tgz
xcyrillic-2.0.tgz xd-8087.tgz
xdaliclock-2.18.tgz xdelta-1.1.1.tgz
xdino-5.5.2.tgz xdmchoose-1.1.2.tgz
xdtm-2.5.8.tgz xdu-3.0.tgz
xearth-1.1.tgz xemacs-21.1.14-mule.tgz
xemacs-21.1.14.tgz xemacs-sumo-21.20020919-mule.tgz
xemacs-sumo-21.20020919.tgz xengine-1.0.1.tgz
xerces-2.1.0.tgz xevil-1.5.tgz
xfce-3.8.18.tgz xfed-1.0.tgz
xfedor-5.0.1.tgz xfig-3.2.3d.tgz
xfm-1.4.3.tgz xfmail-1.5.2-esd.tgz
xfmail-1.5.2.tgz xforms-1.0.tgz
xfstt-1.1.tgz xgas-1.0.tgz
xglobe-0.5p2-no_map.tgz xglobe-0.5p2.tgz
xgolgo-1.0.tgz xgrab-2.41.tgz
xhippo-3.2.tgz xinvaders-2.0.tgz
xinvest-2.6.tgz xjewel-1.6.tgz
xjig-2.4.tgz xkbset-0.5.tgz
xkbset-gui-0.5.tgz xkeycaps-2.46.tgz
xkobo-1.11-harder.tgz xkobo-1.11.tgz
xlbiff-3.0.tgz xless-1.7.tgz
xlhtml-0.2.9.8.tgz xlife-5.3.tgz
xloadimage-4.1.10.tgz xlogout-1.1.tgz
xmahjongg-3.6.1.tgz xmake-1.05.tgz
xmame+xmess-0.56.2-x11.tgz xmame-0.56.2-x11.tgz
Xmascot-2.6a.tgz xmbdfed-4.5.1.tgz
xmcd-2.6p1.tgz xmedcon-0.5.2.tgz
xmess-0.56.2-x11.tgz xmhtml-1.1.7.tgz
xmine-1.0.3.tgz xminehunter-0.4.tgz
xminesweep-3.0.tgz xmix-2.1.tgz
xmj-1.0.tgz xml2rfc-1.17-no_x11.tgz
xml2rfc-1.17.tgz xmlsec-0.0.12.tgz
xmmix-1.2.2.tgz xmms-1.2.7.tgz
xmms-bonk-0.12.tgz xmms-esd-1.2.7.tgz
xmms-flac-1.0.4.tgz xmms-fmradio-1.5.tgz
xmms-gnome-1.2.7.tgz xmms-kj-0.95.tgz
xmms-mikmod-1.2.7.tgz xmms-mp3-1.2.7.tgz
xmms-shn-2.2.7.tgz xmms-sid-0.7.4.tgz
xmms-smpeg-0.3.5.tgz xmms-vorbis-1.2.7.tgz
xmold-1.0.tgz xmp-1.1.5.tgz
xmris-4.04.tgz xmysql-1.10.tgz
xmysqladmin-1.0.tgz xnc-4.4.7.tgz
xneko-4.4.tgz xonix-1.4.tgz
xosview-1.8.0p1.tgz xpaint-2.6.2.tgz
xpat2-1.04p1.tgz xpdf-2.01.tgz
xphoon-91.9.18.tgz xpilot-4.5.4.tgz
xpostit-3.3.1.tgz xprobe-0.0.2.tgz
xprompt-1.4.tgz xps-3.21.tgz
xroach-4.4.tgz xruskb-1.15.2-motif.tgz
xruskb-1.15.2.tgz xscavenger-1.4.3.tgz
xscrabble-1.0.tgz xscreensaver-4.06-gtk2.tgz
xscreensaver-4.06.tgz xskat-3.4.tgz
xsnow-1.40.tgz xsol-2.1.1.tgz
xsoldier-0.96p1.tgz xspread-3.1.1c.tgz
xtacy-1.14.tgz xtar-1.4.tgz
xtattr-1.0.tgz xteddy-2.0.1.tgz
xtermset-0.5.1.tgz xtestpicture-1.2.tgz
xtimer-0.8089.tgz xtoolwait-1.3.tgz
xtraceroute-0.9.0.tgz xuvmstat-20010220.tgz
xv-3.10a.tgz xview-clients-3.2.1.tgz
xview-config-3.2.1.tgz xview-lib-3.2.1.tgz
xvkbd-2.4.tgz xwit-3.4.tgz
xworld-2.0.tgz xwpe-1.5.22a.tgz
xwrits-2.21.tgz xxdiff-2.9.1p0.tgz
xzoom-0.3.tgz yafc-0.7.10.tgz
yelp-1.0.7.tgz yorick-1.5.08p1.tgz
ysmv7-2.8.1.tgz ytalk-3.1.1-no_x11.tgz
ytalk-3.1.1.tgz ytree-1.73.tgz
zangband-2.6.2-no_x11.tgz zangband-2.6.2.tgz
zap-1.3.tgz zebedee-2.4.1.tgz
zebra-0.93a-snmp.tgz zebra-0.93a.tgz
zh-Wnn-4.2.tgz zh-Wnndict-4.2.tgz
zh-bg5pdf-1.0.0.tgz zh-bg5ps-1.3.0.tgz
zh-c2t-1.0.tgz zh-cless-290.tgz
zh-crxvt-2.10.2.tgz zh-fonts-arphicttf-2.11.tgz
zh-fonts-kc-1.05.tgz zh-fonts-taipei-1.01.tgz
zh-hc-3.0.tgz zh-lunar-2.1.tgz
zh-ttfm-0.9.3.tgz zh-xcin-2.3.04.tgz
zip-2.3.tgz zoo-2.10.1.tgz
zoom-0.9.99beta3.tgz zope-2.5.1p1.tgz
zope-cmf-1.2.tgz zsh-4.0.6-static.tgz
zsh-4.0.6.tgz zsh-4.1.0dev5-static.tgz
zsh-4.1.0dev5.tgz zsh-zftp-4.0.6.tgz
zsh-zftp-4.1.0dev5.tgz zsnes-1.36.tgz
Note: these packages may not exist for all architectures; other
packages may be added. Some packages are only available via
ftp.
Installing applications from the CD-ROM ports collection:
The CD-ROM ``ports'' collection is a set of Makefiles, patches,
and other files used to control the building and installation
of an application from source files.
Creating an application from sources can require a lot of
disk space, sometimes 50 megabytes or more. The first step is
to determine which of your disks has enough room. Once you've
made this determination read the file PORTS located on the
CD-ROM which contains the ports tree.
To build an application you must:
1) become the superuser (root)
2) have network access, or obtain the actual source files by
some other means.
3) cd to the ports directory containing the port you wish
to build. To build samba, for example, where you'd
previously copied the ports files into the /usr/ports
directory: cd /usr/ports/net/samba
4) make
5) make install
6) make clean
Installing applications from the OpenBSD ports collection:
See http://www.openbsd.org/ports.html for current instructions
on obtaining and installing OpenBSD ports.
You should also refer to the ports(7) manual page.
Installing other applications:
If an OpenBSD package or port does not exist for an application
you're pretty much on your own. The first thing to do is ask
<ports@openbsd.org> if anyone is working on a port -- there may
be one in progress. If no luck there you may try the FreeBSD
ports or NetBSD package collection. If you are on an i386 based
machine it is quite possible that the FreeBSD port, if one exists,
will work for you.
If you can't find an existing port try to make your own and
feed it back to OpenBSD. That's how our ports collection grows.
Some details can be found at http://www.openbsd.org/porting.html
with more help coming from the mailing list, <ports@openbsd.org>.
Administrivia:
--------------
There are various mailing lists available via the mailing list
server at <majordomo@OpenBSD.ORG>. To get help on using the mailing
list server, send mail to that address with an empty body, and it will
reply with instructions. There are also two OpenBSD Usenet newsgroups,
comp.unix.bsd.openbsd.announce for important announcements and
comp.unix.bsd.openbsd.misc for general OpenBSD discussion.
To report bugs, use the 'sendbug' command shipped with OpenBSD,
and fill in as much information about the problem as you can. Good
bug reports include lots of details. Additionally, bug reports can
be sent by mail to:
bugs@OpenBSD.ORG
Use of 'sendbug' is encouraged, however, because bugs reported with it
are entered into the OpenBSD bugs database, and thus can't slip through
the cracks.
As a favor, please avoid mailing huge documents or files to the
mailing lists. Instead, put the material you would have sent up
for FTP somewhere, then mail the appropriate list about it, or, if
you'd rather not do that, mail the list saying you'll send the data
to those who want it.