INSTALLATION NOTES for OpenBSD/zaurus 4.7 What is OpenBSD? ---------------- OpenBSD is a fully functional, multi-platform UN*X-like Operating System based on Berkeley Networking Release 2 (Net/2) and 4.4BSD-Lite. There are several operating systems in this family, but OpenBSD differentiates itself by putting security and correctness first. The OpenBSD team strives to achieve what is called a 'secure by default' status. This means that an OpenBSD user should feel safe that their newly installed machine will not be compromised. This 'secure by default' goal is achieved by taking a proactive stance on security. Since security flaws are essentially mistakes in design or implement- ation, the OpenBSD team puts as much importance on finding and fixing existing design flaws and implementation bugs as it does writing new code. This means that an OpenBSD system will not only be more secure, but it will be more stable. The source code for all critical system components has been checked for remote-access, local-access, denial- of-service, data destruction, and information-gathering problems. In addition to bug fixing, OpenBSD has integrated strong cryptography into the base system. A fully functional IPsec implementation is provided as well as support for common protocols such as SSL and SSH. Network filtering and monitoring tools such as packet filtering, NAT, and bridging are also standard, as well as several routing services, such as BGP and OSPF. For high performance demands, support for hardware cryptography has also been added to the base system. Because security is often seen as a tradeoff with usability, OpenBSD provides as many security options as possible to allow the user to enjoy secure computing without feeling burdened by it. To integrate more smoothly in other environments, OpenBSD 4.7 also provides, on some platforms, several binary emulation subsystems (which includes iBCS2, Linux, OSF/1, SunOS, SVR4, Solaris, and Ultrix compatibility), aiming at making the emulation as accurate as possible so that it is transparent to the user. Because OpenBSD is from Canada, the export of Cryptography pieces (such as OpenSSH, IPsec, and Kerberos) to the world is not restricted. (NOTE: OpenBSD can not be re-exported from the US once it has entered the US. Because of this, take care NOT to get the distribution from an FTP server in the US if you are outside of Canada and the US.) A comprehensive list of the improvements brought by the 4.7 release is available on the web at http://www.OpenBSD.org/47.html. OpenBSD/zaurus runs on the Sharp Zaurus SL-C3000, SL-C3100 and SL-C3200 PDA. Sources of OpenBSD: ------------------- This is a list of currently known FTP and HTTP servers at the time of the 4.7 release. For a more recent list, please refer to http://www.OpenBSD.org/ftp.html Main server in Canada: ftp://ftp.OpenBSD.org/pub/OpenBSD (Alberta) http://ftp.OpenBSD.org/pub/OpenBSD (Alberta) 2nd level mirrors: ftp://anga.funkfeuer.at/pub/OpenBSD (Vienna, Austria) http://anga.funkfeuer.at/ftp/pub/OpenBSD (Vienna, Austria) ftp://ftp.wu-wien.ac.at/pub/OpenBSD (Vienna, Austria) http://ftp.wu-wien.ac.at/pub/OpenBSD (Vienna, Austria) ftp://ftp.eu.openbsd.org/pub/OpenBSD (Stockholm, Sweden) http://ftp.eu.openbsd.org/pub/OpenBSD (Stockholm, Sweden) ftp://ftp5.usa.openbsd.org/pub/OpenBSD (Redwood City, CA, USA) ftp://ftp3.usa.openbsd.org/pub/OpenBSD (Boulder, CO, USA) ftp://obsd.cec.mtu.edu/pub/OpenBSD (Houghton, Michigan, USA) http://obsd.cec.mtu.edu/pub/OpenBSD (Houghton, Michigan, USA) Argentina: ftp://openbsd.noc.jgm.gov.ar/pub/OpenBSD (Buenos Aires) http://openbsd.noc.jgm.gov.ar/pub/OpenBSD (Buenos Aires) ftp://mirrors.localhost.net.ar/pub/OpenBSD (Buenos Aires) ftp://ftp.openbsd.org.ar/pub/OpenBSD (Buenos Aires) http://openbsd.org.ar/pub/OpenBSD (Buenos Aires) Australia: ftp://ftp.iinet.net.au/pub/OpenBSD (Perth) http://ftp.iinet.net.au/pub/OpenBSD (Perth) ftp://mirror.pacific.net.au/OpenBSD (Sydney) http://mirror.pacific.net.au/OpenBSD (Sydney) ftp://mirror.internode.on.net/pub/OpenBSD (Adelaide) http://mirror.internode.on.net/pub/OpenBSD (Adelaide) ftp://mirror.aarnet.edu.au/pub/OpenBSD (Brisbane) http://mirror.aarnet.edu.au/pub/OpenBSD (Brisbane) Belgium: ftp://ftp.belnet.be/packages/openbsd (Brussels) http://ftp.belnet.be/packages/openbsd (Brussels) Brazil: ftp://ftp.das.ufsc.br/pub/OpenBSD (Florianopolis) http://ftp.das.ufsc.br/pub/OpenBSD (Florianopolis) http://mirrors.uol.com.br/pub/OpenBSD (Sao Paulo) http://ivete.fis.unb.br/mirror/OpenBSD (Brasilia) Canada: ftp://openbsd.arcticnetwork.ca/pub/OpenBSD (Calgary) ftp://ftp.ca.openbsd.org/pub/OpenBSD (Edmonton) China: ftp://ftp.freebsdchina.org/pub/OpenBSD (Shanghai) Costa Rica: ftp://mirrors.ucr.ac.cr/OpenBSD http://mirrors.ucr.ac.cr/OpenBSD Denmark: ftp://ftp.openbsd.dk/pub/OpenBSD (Aalborg) http://ftp.openbsd.dk/pub/OpenBSD (Aalborg) ftp://ftp.dkuug.dk/pub/OpenBSD (Copenhagen) http://ftp.dkuug.dk/pub/OpenBSD (Copenhagen) Estonia: ftp://ftp.aso.ee/pub/OpenBSD (Tallinn) http://ftp.aso.ee/pub/OpenBSD (Tallinn) ftp://ftp.estpak.ee/pub/OpenBSD (Tallinn) http://ftp.estpak.ee/pub/OpenBSD (Tallinn) Finland: ftp://mirrors.nic.funet.fi/pub/OpenBSD (Espoo) http://mirrors.nic.funet.fi/pub/OpenBSD (Espoo) ftp://ftp.jyu.fi/pub/OpenBSD (Jyvaskyla) http://ftp.jyu.fi/ftp/pub/OpenBSD (Jyvaskyla) France: ftp://ftp.fr.openbsd.org/pub/OpenBSD (Paris) http://ftp.fr.openbsd.org/pub/OpenBSD (Paris) ftp://ftp.arcane-networks.fr/pub/OpenBSD (Paris) http://ftp.arcane-networks.fr/pub/OpenBSD (Paris) ftp://ftp.crans.org/pub/OpenBSD (Paris) ftp://ftp.irisa.fr/pub/OpenBSD (Rennes) ftp://ftp2.fr.openbsd.org/pub/OpenBSD (Paris) Germany: ftp://openbsd.ftp.fu-berlin.de/pub/OpenBSD (Berlin) ftp://ftp.spline.de/pub/OpenBSD (Berlin) ftp://ftp.freenet.de/pub/ftp.openbsd.org/pub/OpenBSD (Dusseldorf) ftp://ftp-stud.fht-esslingen.de/pub/OpenBSD (Esslingen) http://ftp-stud.fht-esslingen.de/pub/OpenBSD (Esslingen) ftp://mirror.roothell.org/pub/OpenBSD (Nurnberg) http://mirror.roothell.org/pub/OpenBSD (Nurnberg) ftp://ftp.bytemine.net/pub/OpenBSD (Oldenburg) http://artfiles.org/openbsd (Hamburg) Greece: ftp://ftp.cc.uoc.gr/mirrors/OpenBSD (Heraklion) http://ftp.cc.uoc.gr/mirrors/OpenBSD (Heraklion) Hungary: ftp://ftp.fsn.hu/pub/OpenBSD (Budapest) Indonesia: ftp://ftp.openbsd.or.id/pub/OpenBSD (Jakarta) Ireland: ftp://ftp.esat.net/pub/OpenBSD (Dublin) http://ftp.esat.net/pub/OpenBSD (Dublin) ftp://ftp.heanet.ie/pub/OpenBSD (Dublin) http://ftp.heanet.ie/pub/OpenBSD (Dublin) Japan: ftp://ftp.jaist.ac.jp/pub/OpenBSD (Ishikawa) http://ftp.jaist.ac.jp/pub/OpenBSD (Ishikawa) ftp://ftp.kddlabs.co.jp/OpenBSD (Tokyo) Korea: ftp://ftp.kaist.ac.kr/pub/OpenBSD (Daejeon) http://ftp.kaist.ac.kr/pub/OpenBSD (Daejeon) The Netherlands: ftp://ftp.nluug.nl/pub/OpenBSD (Utrecht) ftp://mirror.hostfuss.com/pub/OpenBSD (Amsterdam) http://mirror.hostfuss.com/pub/OpenBSD (Amsterdam) Norway: ftp://ftp.inet.no/pub/OpenBSD (Oslo) ftp://ftp.uninett.no/pub/OpenBSD (Oslo) Poland: ftp://ftp.task.gda.pl/pub/OpenBSD (Gdansk) http://ftp.task.gda.pl/pub/OpenBSD (Gdansk) ftp://ftp.piotrkosoft.net/pub/OpenBSD (Oswiecim) http://piotrkosoft.net/pub/OpenBSD (Oswiecim) ftp://ftp.tpnet.pl/pub/OpenBSD (Warsaw) Russia: ftp://ftp.gamma.ru/pub/OpenBSD (Moscow) ftp://mirror.corbina.net/pub/OpenBSD (Moscow) Saudi Arabia: ftp://mirrors.isu.net.sa/pub/ftp.openbsd.org (Riyadh) http://mirrors.isu.net.sa/pub/ftp.openbsd.org (Riyadh) Slovenia: ftp://ftp.obsd.si/pub/OpenBSD (Ljubljana) http://www.obsd.si/pub/OpenBSD (Ljubljana) South Africa: ftp://ftp.is.co.za/mirror/ftp.openbsd.org (Johannesburg) Spain: ftp://ftp.rediris.es/pub/OpenBSD (Madrid) http://sunsite.rediris.es/pub/OpenBSD (Madrid) ftp://ftp.udc.es/pub/OpenBSD (A Coruna) http://ftp.udc.es/OpenBSD (A Coruna) ftp://mirror.cdmon.com/pub/OpenBSD (Barcelona) Sweden: ftp://ftp.df.lth.se/pub/OpenBSD (Lund) ftp://ftp.netbsd.se/OpenBSD (Stockholm) http://ftp.netbsd.se/OpenBSD (Stockholm) Switzerland: ftp://mirror.switch.ch/pub/OpenBSD (Zurich) http://mirror.switch.ch/ftp/pub/OpenBSD (Zurich) Taiwan: ftp://ftp.tw.openbsd.org/pub/OpenBSD (Hsinchu) ftp://ftp.tcc.edu.tw/pub/OpenBSD (TaiChung) http://ftp.tcc.edu.tw/pub/OpenBSD (TaiChung) ftp://ftp.cs.pu.edu.tw/BSD/OpenBSD (Taichung) http://openbsd.cs.pu.edu.tw (Taichung) Turkey: ftp://ftp.ulak.net.tr/OpenBSD United Kingdom: ftp://ftp.mirrorservice.org/pub/OpenBSD (Kent) http://www.mirrorservice.org/pub/OpenBSD (Kent) ftp://mirror.bytemark.co.uk/pub/OpenBSD (Manchester) http://mirror.bytemark.co.uk/pub/OpenBSD (Manchester) ftp://ftp.plig.net/pub/OpenBSD (London) http://ftp.plig.net/pub/OpenBSD (London) USA: http://openbsd.berkeley.edu/pub/OpenBSD (Berkeley, CA) ftp://mirror.planetunix.net/pub/OpenBSD (Los Angeles, CA) http://mirror.planetunix.net/pub/OpenBSD (Los Angeles, CA) ftp://mirror.iawnet.sandia.gov/pub/OpenBSD (Albuquerque, NM) ftp://ftp.cse.buffalo.edu/pub/OpenBSD (Buffalo, NY) ftp://mirrors.24-7-solutions.net/pub/OpenBSD (New York, NY) http://mirrors.24-7-solutions.net/pub/OpenBSD (New York, NY) ftp://openbsd.mirrors.pair.com (Pittsburgh, PA) http://openbsd.mirrors.pair.com/ftp (Pittsburgh, PA) ftp://carroll.cac.psu.edu/pub/OpenBSD (PA) http://carroll.cac.psu.edu/pub/OpenBSD (PA) http://openbsd.mirrors.hoobly.com (Pittsburgh, PA) ftp://openbsd.mirrors.tds.net/pub/OpenBSD (Madison, WI) http://openbsd.mirrors.tds.net/pub/OpenBSD (Madison, WI) ftp://filedump.se.rit.edu/pub/OpenBSD (Rochester, NY) http://filedump.se.rit.edu/pub/OpenBSD (Rochester, NY) ftp://mirror.rit.edu/pub/OpenBSD (Rochester, NY) http://mirror.rit.edu/pub/OpenBSD (Rochester, NY) ftp://openbsd.mirror.frontiernet.net/pub/OpenBSD (Rochester, NY) http://openbsd.mirror.frontiernet.net/pub/OpenBSD (Rochester, NY) ftp://ftp.lambdaserver.com/pub/OpenBSD (Chicago, Illinois) http://ftp.lambdaserver.com/pub/OpenBSD (Chicago, Illinois) Additionally, the file ftp://ftp.OpenBSD.org/pub/OpenBSD/ftplist contains a list which is continually updated. If you wish to become a distribution site for OpenBSD, contact . OpenBSD 4.7 Release Contents: ----------------------------- The OpenBSD 4.7 release is organized in the following way. In the .../4.7 directory, for each of the architectures having an OpenBSD 4.7 binary distribution, there is a sub-directory. The zaurus-specific portion of the OpenBSD 4.7 release is found in the "zaurus" subdirectory of the distribution. That subdirectory is laid out as follows: .../4.7/zaurus/ INSTALL.zaurus Installation notes; this file. SHA256 Output of the sum(1) program using the option -a sha256, usable for verification of the correctness of downloaded files. *.tgz zaurus binary distribution sets; see below. bsd A stock GENERIC zaurus kernel which will be installed on your system during the install. bsd.rd A compressed RAMDISK kernel; the embedded filesystem contains the installation tools. Used for simple installation from a pre-existing system. zboot The OpenBSD/zaurus disk-based boot loader. zbsdmod.o The OpenBSD/zaurus memory-based boot loader. openbsd47_arm.ipk An installable package for Linux containing the boot loader and the RAMDISK kernel. Packages Index file for the Linux package installer. The OpenBSD/zaurus binary distribution sets contain the binaries which comprise the OpenBSD 4.7 release for zaurus systems. There are eleven binary distribution sets. The binary distribution sets can be found in the "zaurus" subdirectory of the OpenBSD 4.7 distribution tree, and are as follows: base47 The OpenBSD/zaurus 4.7 base binary distribution. You MUST install this distribution set. It contains the base OpenBSD utilities that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. [ 47.5 MB gzipped, 131.9 MB uncompressed ] comp47 The OpenBSD/zaurus Compiler tools. All of the tools relating to C, C++, Objective-C and Fortran are supported. This set includes the system include files (/usr/include), the linker, the compiler tool chain, and the various system libraries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. [ 19.3 MB gzipped, 65.0 MB uncompressed ] etc47 This distribution set contains the system configuration files that reside in /etc and in several other places. This set MUST be installed if you are installing the system from scratch, but should NOT be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and CAREFULLY upgrade your configuration files by hand; see the section named Upgrading a previously-installed OpenBSD System" below.) [ 513.2 KB gzipped, 1.5 MB uncompressed ] game47 This set includes the games and their manual pages. [ 2.5 MB gzipped, 5.6 MB uncompressed ] man47 This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. [ 9.0 MB gzipped, 32.9 MB uncompressed ] misc47 This set includes the system dictionaries (which are rather large), and the typesettable document set. [ 356.2 KB gzipped, 1.1 MB uncompressed ] xbase47 This set includes the base X distribution. This includes programs, headers and libraries. [ 11.0 MB gzipped, 33.5 MB uncompressed ] xetc47 This set includes the X window system configuration files that reside in /etc. It's the equivalent of etc47 for X. [ 69.2 KB gzipped, 264.2 KB uncompressed ] xfont47 This set includes all of the X fonts. [ 37.8 MB gzipped, 49.0 MB uncompressed ] xserv47 This set includes all of the X servers. [ 5.0 MB gzipped, 13.2 MB uncompressed ] xshare47 This set includes all text files equivalent between all architectures. [ 2.8 MB gzipped, 15.3 MB uncompressed ] OpenBSD System Requirements and Supported Devices: -------------------------------------------------- The following Sharp Zaurus models are supported by OpenBSD: SL-C3000 SL-C3100 SL-C3200 In addition to the on-board devices (keyboard, touchscreen, microdrive, and serial ports), many USB devices are supported. These include: Ethernet Adapters ADMtek AN986-based USB adapters, including: Abocom UFE1000 Abocom DSB650TX Accton USB320-EC Accton SpeedStream Ethernet Admtek Pegasus, Pegasus II Billionton Systems USB100 Corega FEther USB-TX D-Link DSB-650, 650TX, 650TX-PNA Elecom LD-USB Elsa Microlink USB2Ethernet I/O Data USB ETTX Kingston KNU101TX Linksys USB100TX, USB100H1 and USB10TA Melco Inc. LUA-TX Siemens SpeedStream USB SmartBridges smartNIC 2 SMC 2202USB/ETH SMC 2206USB/ETH SOHOware NUB100 ASIX Electronics AX88172/AX88178/AX88772 USB Ethernet adapters, including: ATEN UC210T BAFO BF-320 Billionton Systems USB2AR Buffalo(MELCO) LUA-U2-KTX Corega FEther USB2-TX D-Link DUB-E100 Good Way GWUSB2E Hawking UF200 Intellinet USB 2.0 to Ethernet (rev A) IO-Data ETG-US2 JVC MP-PRX1 Level One USB-0200 Linksys USB200M Netgear FA120 Nintendo Wii USB Lan Ethernet Adapter RVL-015 OQO model 01+ Ethernet Sitecom LN-029 SMC 2209USB/ETH SnapPort USB 2.0 LAN Adapter ST Lab USB 2.0 Fast Ethernet Surecom EP-1427X-2 System TALKS SGC-X2UL TRENDnet TU2-ET100 Z-TEK ZK-R01-2 CATC USB-EL1210A-based USB adapters, including: CATC Netmate and Netmate II Belkin F5U011/F5U111 Davicom DM9601 based USB adapters, including: Corega FEther USB-TXC HenTong WK-668 ShanTou ST268 Kawasaki LSI KL5KUSB101B-based USB adapters, including: 3Com 3c19250 3Com 3c460 HomeConnect AboCom Systems URE450 Ethernet ADS Technologies USB-10T Aox USB101 Asante USB to Ethernet ATen DSB-650C ATen UC10T Corega USB-T D-Link DSB-650C Entegra NET-USB-E45 I/O Data USB-ET/T Jaton USB XpressNet Kawasaki USB101 Kingston Ethernet Linksys USB10T Mobility Ethernet Netgear EA101 Peracom USB Portgear Ethernet Portsmith Express Ethernet Psion Dacom Gold Port Ethernet Shark Pocket Adapter Silicom U2E SMC 2102/2104USB NE2000 compatible CF Ethernet adapters Billionton Systems CFLT2-10N Buffalo LPC-CF-CLT Hawking CF686TX Tamarack TC3299CE TRENDnet TE-CF100 RealTek RTL8150L based USB adapters, including: Abocom RTL8151 BAFO BF-310 Billionton USBKR-100 Compex UE202-B GreenHouse GH-USB100B GreenHouse GH-USB100B with HomePNA Hawking Technology HUF11 Linksys USB100M Longshine LCS-8138TX Melco Inc. LUA-KTX Micronet SP128AR NetComm NP1010 Repotec RP-USB100-A SMC 2208USB/ETH TRENDnet TU-ET100C Zt USB10/100 Z-TEK ZK-R02 Wireless Ethernet Adapters Atmel AT76C50x IEEE 802.11b USB adapters Marvell Libertas IEEE 802.11b/g Compact Flash adapters (will be detected as PCMCIA adapters) Ambicom WL54CF Ralink Technology IEEE 802.11b/g USB adapters Ralink Technology USB IEEE 802.11a/b/g USB adapters Ralink Technology USB IEEE 802.11a/b/g/Draft-N USB adapters WaveLAN/IEEE, PRISM 2-3, and Spectrum24 IEEE 802.11b USB adapters WaveLAN/IEEE, PRISM 2-3, and Spectrum24 IEEE 802.11b Compact Flash adapters (will be detected as PCMCIA adapters) AmbiCom WL1100C-CF ASUS SpaceLink WL-110 Belkin F5D6060 (version 1 only) Buffalo AirStation D-Link DCF-660W ELSA XI800 Linksys WCF12 Netgear MA701 Pretec Compact WLAN OC-WLBXX-A Senao NL-2511CF WaveLAN/IEEE, PRISM 2-3, and Spectrum24 IEEE 802.11b PCMCIA adapters Serial ports Most modems, digital cellular modems, and serial cards should work Universal Serial Bus (USB) Devices USB Audio USB Diamond Multimedia Rio MP3 players USB Ethernet adapters, see above USB Generic Human Interface Devices (catch-all) USB Handspring Visor USB Hubs USB Keyboards USB Mass Storage devices, i.e., USB floppy drives and USB memory stick controllers USB Mice USB Modems USB Printers USB Scanners USB-USB cables USB Y@p phone Miscellaneous Devices Meinberg Funkuhren radio clocks USB5131 USB attached DCF77 radio clock Gude ADS radio clocks Expert mouseCLOCK USB attached DCF77 radio clock Getting the OpenBSD System onto Useful Media: --------------------------------------------- Installation is supported from several media types, including: CD-ROM FFS partitions DOS (FAT) partitions EXT2 partitions FTP HTTP The steps necessary to prepare the distribution sets for installation depend on which method of installation you choose. Some methods require a bit of setup first that is explained below. The installation allows installing OpenBSD directly from FTP mirror sites over the internet, however you must consider the speed and reliability of your internet connection for this option. It may save much time and frustration to use ftp get/reget to transfer the distribution sets to a local server or disk and perform the installation from there, rather than directly from the internet. If you are upgrading OpenBSD, you also have the option of installing OpenBSD by putting the new distribution sets somewhere in your existing file system, and using them from there. To do that, do the following: Place the distribution sets you wish to upgrade somewhere in your current file system tree. At a bare minimum, you must upgrade the "base" binary distribution, and so must put the "base47" set somewhere in your file system. It is recommended that you upgrade the other sets, as well. Preparing your System for OpenBSD Installation: ----------------------------------------------- No specific preparation is required before installing OpenBSD/zaurus. However, the installation process will require the data partition to be shrunk and recreated; before installing OpenBSD/zaurus, you should make sure any important data on this partition is backed up. Installing the OpenBSD System: ------------------------------ Installing OpenBSD is a relatively complex process, but if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble. OpenBSD is installed on the Zaurus by effectively converting Linux into a bootloader. This can be done easily by installing a package from Qtopia, or manually from a terminal. Both ways are described below, the easy one first. The package takes care of modifying the Linux startup files for you as necessary. To protect you from a common pitfall, ext3 filesystems mounted on /hdd[12] are converted back to ext2. (That way a fatal error in Linux startup scripts is avoided when the journal has been destroyed by mounting one of the ext3 filesystems as ext2 on OpenBSD). 1. Press "Home" until the second icon tab is selected (Settings). 2. Open the "Add/Remove Software" dialog. That's the green icon with an arrow pointing from left to right into a rectangle. 3. Press "Install packages via networks", the middle one of the three big buttons. The "Package Manager" dialog pops up. 4. Press the yellow switch icon in the lower right corner to bring up the "Package Servers" dialog. 5. Press the left button, which is labeled "New" if your Zaurus is in English, enter the HTTP/FTP URL of the nearest OpenBSD mirror, and change the field above the URL into a name for that server. Press the "OK" button in the upper right corner to return to the "Package Manager" dialog. 6. Press the "Upgrade" button in the lower left corner to update the package index if that was not done automatically. A package named "openbsd" should appear in the package list. Select this package and press the question mark icon in the lower right corner. 7. Now you see the package details and three buttons, labeled "Install", "Remove", and "Ignore" in this order. Press the leftmost button and twice "OK" to finish the installation. Then close the "Add/Remove Software" dialog. 8. Activate the "Q" menu in the lower left corner of the screen and choose "Reboot" (that's the item with a green icon next to it, above the power-off icon). Wait for the system to reboot. At the boot> prompt, hit enter to boot OpenBSD, or type 'r' to boot Linux. Since you want to install OpenBSD, this time you will want to type 'r'. 9. Wait while Linux is coming up, then switch to the first tab (Applications), scroll down, and press the icon which is labeled "Install OpenBSD". A few seconds later, an OpenBSD bsd.rd will boot on your Zaurus, so that you can perform the standard install process. Another way to install the package is from a shell. You will need the following file from the distribution on the Zaurus: openbsd47_arm.ipk Perform the following operation as root to install the package, and then continue as in step 8, above: # ipkg install openbsd47_arm.ipk To install the OpenBSD boot program manually, you will need the following files from the distribution: zbsdmod.o zboot bsd.rd After starting up some sort of terminal emulator on the Zaurus and becoming root, perform the following operation: # insmod zbsdmod.o # cp bsd.rd /proc/zboot A few seconds later, OpenBSD will boot on your Zaurus. If you already have a bsd.rd or bsd kernel contained in a FFS partition on the C3x00 hard drive, you can instead use # insmod zbsdmod.o # ./zboot You should now be ready to install OpenBSD. The following is a walk-through of the steps you will take while getting OpenBSD installed on your hard disk. The installation procedure is designed to gather as many information about your system setup as possible at the beginning, so that no human interaction is required as soon as the questions are over. The order of these questions might be quite disconcerting if you are used to other installation procedures, including older OpenBSD versions. If any question has a default answer, it will be displayed in brackets ("[]") after the question. If you wish to stop the installation, you may hit Control-C at any time, but if you do, you'll have to begin the installation process again from scratch. Using Control-Z to suspend the process may be a better option, or at any prompt enter `!' to get a shell, from which 'exit' will return you back to that prompt (no refresh of the prompt will occur, though). Once the kernel has loaded, you will be presented with the OpenBSD kernel boot messages. You will want to read them to determine your disks name and geometry. Its name will be something like "wd0". You will also need to know the device name to tell the install tools what disk to install on. If you cannot read the messages as they scroll by, do not worry -- you can get at this information later inside the install program. After the kernel is done initialization, you will be asked whether you wish to do an "(I)nstall" or an "(U)pgrade". Enter 'I' for a fresh install or 'U' to upgrade an existing installation. If you are connected with a serial console, you will next be asked for your terminal type. You should choose the terminal type from amongst those listed. (If your terminal type is xterm, just use vt220). The first question you will be asked is the system hostname. Reply with the name of the system, without any domain part. You will now be given an opportunity to configure the network. The network configuration you enter (if any) can then be used to do the install from another system using HTTP or FTP, and will also be the configuration used by the system after the installation is complete. The install program will give you a list of network interfaces you can configure. For each network interface you select to configure, you will be asked for: - the symbolic host name to use (except for the first interface setup, which will reuse the host name entered at the beginning of the installation). - the IPv4 settings: address and netmask. If the IP address should be obtained from a DHCP server, simply enter ``dhcp'' when asked for the address. - the IPv6 settings (address, prefix length, and default router). You may enter ``rtsol'' when asked for the address for the interface to configure automatically via router sollicitation messages. After all interfaces have been configured, if there have been any IPv4 interfaces setup, you will be asked for the IPv4 default route. This step is skipped if you only have one IPv4 interface setup, and it is configured with DHCP. The install program will also ask you for your DNS domain name, and the domain name servers, unless this information has already been obtained from a DHCP server during interface setup. You will also be presented with an opportunity to do more manual configuration. If you accept, you will be dropped to a shell; when you are done, enter `exit' to return to the installation program. You will then be asked to enter the initial root password of the system, twice. Although the install program will only check that the two passwords match, you should make sure to use a strong password. As a minimum, the password should be at least eight characters long and a mixture of both lower and uppercase letters, numbers and punctuation characters. You will then be asked whether you want to start sshd(8) by default, as well as ntpd(8). If you choose to start ntpd(8), you will be asked for your ntp server; if you don't have any preferred ntp server, press enter to confirm the default setting of using the pool.ntp.org servers. Since the X Window System can run on OpenBSD/zaurus without the need for a configuration file, you will get asked whether you want to start xdm on boot. If you are installing using a serial console, and since by default, the OpenBSD/zaurus installation will only start terminals on the primary display device, the installation program will ask you whether you want to also enable an additional terminal on that line, and will allow you to select the line speed. You will now be given the possibility to setup a user account on the forthcoming system. This user will be added to the `wheel' group. Enter the desired login name, or `n' if you do not want to add a user account at this point. Valid login names are sequences of digits and lowercase letters, and must start with a lowercase letter. If the login name matches this criteria, and doesn't conflict with any of the administrative user accounts (such as `root', `daemon' or `ftp'), you will be prompted with the users descriptive name, as well as its password, twice. As for the root password earlier, the install program will only check that the two passwords match, but you should make sure to use a strong password here as well. If you have chosen to setup a user account, and you had chosen to start sshd(8) on boot, you will be given the possibility to disable sshd(8) logins as root. The installation program will now tell you which disks it can install on, and ask you which it should use. Reply with the name of your root disk. Disks on OpenBSD/zaurus are partitioned using the so-called ``MBR'' partitioning scheme. You will need to create one MBR partition, in which all the real OpenBSD partitions will be created. One of the three partitions on the Zaurus C3x00 hard drive is a 3GB or 5GB MS-DOS filesystem. This partition has application and user data on it and can be a lot smaller. It is therefore recommended that you cut most of the space off this large MS-DOS partition, and create a new A6 partition afterwards, like this: 0: 83 0 3 13 - 1511 7 17 [ 63: 205569 ] Linux files* 1: 83 1512 0 1 - 7559 7 17 [ 205632: 822528 ] Linux files* 2: 0C 7560 0 1 - 9065 7 1 [ 1028160: 204800 ] Win95 FAT32L 3: A6 9065 7 2 - 67885 5 3 [ 1232960: 7999488 ] OpenBSD After shrinking the MS-DOS partition, you will need to reformat it from Linux or OpenBSD once OpenBSD is installed. (You will be reminded of this later in this document) The installation program will ask you if you want to use the whole disk for OpenBSD. If you don't need to or don't intend to share the disk with other operating systems, answer `w' here. The installation program will then create a single MBR partition spanning the whole disk, dedicated to OpenBSD. Otherwise, fdisk(8) will be invoked to let you to edit your MBR partitioning. The current MBR partitions defined will be displayed and you will be allowed to modify them, add new partitions, and change which partition to boot from by default. After your OpenBSD MBR partition has been setup, the real partition setup can follow. Next the disk label which defines the layout of the OpenBSD partitions must be set up. Each file system you want will require a separate partition. You will be proposed a default partition layout, trying to set up separate partitions, disk size permitting. You will be given the possibility to either accept the proposed layout, or edit it, or create your own custom layout. These last two choices will invoke the disklabel(8) interactive editor, allowing you to create your desired layout. Within the editor, you will probably start out with only the 'c' partition of fstype 'unused' that represents the whole disk. This partition can not be modified. If you have Linux partitions defined on the disk, these will usually show up as partition 'i', 'j' and so on. You must create partition 'a' as a native OpenBSD partition, i.e. one with "4.2BSD" as the fstype, to hold the root file system. In addition to partition 'a' you should create partition 'b' with fstype "swap", and native OpenBSD partitions to hold separate file systems such as /usr, /tmp, /var, and /home. You will need to provide a mount point for all partitions you define. Partitions without mount points, or not of 4.2BSD fstype, will neither be formatted nor mounted during the installation. For quick help while in the interactive editor, enter '?'. The `z' command (which deletes all partitions and starts with a clean label), the `A' command (which performs the automatic partition layout) and the `n' command (to change mount points) are of particular interest. Although the partitions position and size are written in exact sector values, you do not need a calculator to create your partitions! Human-friendly units can be specified by adding `k', `m' or `g' after any numbers to have them converted to kilobytes, megabytes or gigabytes. Or you may specify a percentage of the disk size using `%' as the suffix. Enter 'M' to view the entire manual page (see the info on the ``-E'' flag). To exit the editor enter 'q'. After the layout has been saved, new filesystems will be created on all partitions with mount points. This will DESTROY ALL EXISTING DATA on those partitions. After configuring your root disk, the installer will return to the list of available disks to configure. You can choose the other disks to use with OpenBSD in any order, and will get to setup their layout similarly to the root disk above. However, for non-root disks, you will not be proposed a default partition layout. When all your disks are configured, simply hit return at the disk prompt. After these preparatory steps have been completed, you will be able to extract the distribution sets onto your system. There are several install methods supported: FTP, HTTP, CD-ROM, or a local disk partition. To install via FTP or HTTP: To begin an FTP or HTTP install you will need the following pieces of information: 1) Proxy server URL if you are using a URL-based FTP or HTTP proxy (squid, CERN FTP, Apache 1.2 or higher). You need to define a proxy if you are behind a firewall that blocks outgoing FTP or HTTP connections (assuming you have a proxy available to use). 2) The IP address (or hostname if you configured DNS servers earlier in the install) of an FTP or HTTP server carrying the OpenBSD 4.7 distribution. The installation program will try to fetch a list of such servers; depending on your network settings, this might fail. If the list could be fetched, it will be displayed, and you can choose an entry from the list (the first entries are expected to be the closest mirrors to your location). 3) The directory holding the distribution sets. The default value of pub/OpenBSD/4.7/zaurus is almost always correct on FTP servers; for HTTP servers there is no standard location for this. 4) For FTP installs only, the login and password for the FTP account. You will only be asked for a password for non-anonymous FTP. Then refer to the section named "installation set selection" below. To install from CD-ROM: When installing from a CD-ROM, you will be asked which device holds the distribution sets. This will typically be "cd0". If there is more than one partition on the CD-ROM, you will be asked which partition the distribution is to be loaded from. This is normally partition "a". You will also have to provide the relative path to the directory on the CD-ROM which holds the distribution, for the zaurus this is "4.7/zaurus". Then refer to the section named "installation set selection" below. To install from a local disk partition: When installing from a local disk partition, you will first have to identify which disk holds the distribution sets. This is normally "wdN" or "sdN", where N is a number. Next you will have to identify the partition within that disk that holds the distribution; this is a single letter between 'a' and 'p'. You will also have to identify the type of file system residing in the partition identified. Currently, you can install from partitions that have been formatted as the Berkeley fast file system (ffs), Linux (ext2) or MS-DOS. You will also have to provide the relative path to the directory on the file system where the distribution sets are located. Note that this path should not be prefixed with a '/'. Then refer to the next section. Installation set selection: A list of available distribution sets found on the given location will be listed. You may individually select distribution sets to install, by entering their name, or wildcards (e.g. `*.tgz' or `base*|comp*', or `all' to select all the sets (which is what most users will want to do). You may also enter `abort' to deselect everything and restart the selection from scratch, or unselect sets by entering their name prefixed with `-' (e.g. `-x*'). It is also possible to enter an arbitrary filename and have it treated as a file set. When you are done selecting distribution sets, enter `done'. The files will begin to extract. After the files have been extracted, you will be given the choice to select a new location from which to install distribution sets. If there have been errors extracting the sets from the previous location, or if some sets have been missing, this allows you to select a better source. Also, if the installation program complains that the distribution sets you have been using do not match their recorded checksums, you might want to check your installation source (although this can happen between releases, if a snapshot is being updated on an FTP or HTTP server with newer files while you are installing). The last thing you'll need to configure is the time zone your system will be using. For this to work properly, it is expected that you have installed at least the "base47", "etc47", and "bsd" distribution sets. The installation program will then proceed to save the system configuration, create all the device nodes needed by the installed system, and will install bootblocks on the root disk. Congratulations, you have successfully installed OpenBSD 4.7. When you reboot into OpenBSD, you should log in as "root" at the login prompt. You should create yourself an account and protect it and the "root" account with good passwords. The install program leaves root an initial mail message. We recommend you read it, as it contains answers to basic questions you might have about OpenBSD, such as configuring your system, installing packages, getting more information about OpenBSD, sending in your dmesg output and more. To do this, run mail and then just enter "more 1" to get the first message. You quit mail by entering "q". Some of the files in the OpenBSD 4.7 distribution might need to be tailored for your site. We recommend you run: man afterboot which will tell you about a bunch of the files needing to be reviewed. If you are unfamiliar with UN*X-like system administration, it's recommended that you buy a book that discusses it. If you have kept the MS-DOS partition, do not forget to newfs it using: newfs -t msdos /dev/rwd0k This should be done before attempting to mount and use this partition from Linux or OpenBSD. For purposes of recovery in case Linux becomes inoperable for one reason or another with HDD1 Errors and such, we detail the process to come up single user: Remove power and the battery. Begin holding down the 'b' and 'd' keys. Wait for 1 minute. Insert battery and power on unit. As soon as a login screen starts to show up, release the 'b' and 'd' keys. Login as root. The following sequence is also recommended inside Linux so that problems will happen less often. By default the boot scripts fail if the MS-DOS partition is corrupt in any way. If you are already root do the following, which will skip mounting the MS-DOS partition. Login as root. Find the rc.rofilesys file. It is either in /root/etc/rc.d cd /root/home/etc/rc.d Or you have to mount it using: mount /dev/mtdblock2 /mnt cd /mnt/home/etc/rc.d cat rc.rofilesys | sed -e '/vfat/s/^/#/' > vfat diff -u rc.rofilesys vfat # to double check cp rc.rofilesys rc.rofilesys.vfat cp vfat rc.rofilesys In these cases below we avoid using vi because Linux quality is of such high caliber that vi locks up the console. If you logged in multiuser you may be able to use vi. Please be aware that if you fsck the two Linux partitions on the disk, they are actually ext3fs partitions and you will thereby corrupt their journals. This will make them into ext2fs partitions. Linux will not be able to boot, and you will need to use the processes below to get to the point where Linux will mount them as ext2fs partitions: Login as root. Find the rc.rofilesys file. It is either in /root/etc/rc.d cd /root/home/etc/rc.d Or you have to mount it using: mount /dev/mtdblock2 /mnt cd /mnt/home/etc/rc.d cat rc.rofilesys | sed -e '/^LINUXFMT=ext3$/s/^/#/' \ -e '/^#LINUXFMT=ext2$/s/^#//' > ext2 diff -u rc.rofilesys ext2 # to double check cp rc.rofilesys rc.rofilesys.ext3 cp ext2 rc.rofilesys Upgrading a previously-installed OpenBSD System: ------------------------------------------------ Warning! Upgrades to OpenBSD 4.7 are currently only supported from the immediately previous release. The upgrade process will also work with older releases, but might not execute some migration tasks that would be necessary for a proper upgrade. The best solution, whenever possible, is to backup your data and reinstall from scratch. To upgrade OpenBSD 4.7 from a previous version, start with the general instructions in the section "Installing OpenBSD". Boot from your usual boot device. When prompted, select the (U)pgrade option rather than the (I)nstall option at the prompt in the install process. You will be presented with a welcome message and asked if you really wish to upgrade. The upgrade script will ask you for the existing root partition, and will use the existing filesystems defined in /etc/fstab to install the new system in. It will also use your existing network parameters. From then, the upgrade procedure is very close to the installation procedure described earlier in this document. Note that the upgrade procedure will not let you pick neither the ``etc47.tgz'' nor the ``xetc47.tgz'' sets, so as to preserve your files in `/etc' which you are likely to have customized since a previous installation. However, it is strongly advised that you unpack the etc47.tgz and xetc47.tgz sets in a temporary directory and merge changes by hand, or with the help of the sysmerge(8) helper script, since all components of your system may not function correctly until your files in `/etc' are updated. Getting source code for your OpenBSD System: -------------------------------------------- Now that your OpenBSD system is up and running, you probably want to get access to source code so that you can recompile pieces of the system. A few methods are provided. If you have an OpenBSD CD-ROM, the source code is provided. Otherwise, you can get the pieces over the Internet using anonymous CVS, CTM, CVSync or FTP. For more information, see http://www.OpenBSD.org/anoncvs.html http://www.OpenBSD.org/ctm.html http://www.OpenBSD.org/cvsync.html http://www.OpenBSD.org/ftp.html Using online OpenBSD documentation: ----------------------------------- Documentation is available if you first install the manual pages distribution set. Traditionally, the UN*X "man pages" (documentation) are denoted by 'name(section)'. Some examples of this are intro(1), man(1), apropos(1), passwd(1), passwd(5) and afterboot(8). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The 'man' command is used to view the documentation on a topic, and is started by entering 'man [section] topic'. The brackets [] around the section should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the least-numbered section name will be displayed. For instance, after logging in, enter man passwd to read the documentation for passwd(1). To view the documentation for passwd(5), enter man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where "subject-word" is your topic of interest; a list of possibly related man pages will be displayed. Adding third party software; ``packages'' and ``ports'': -------------------------------------------------------- As complete as your OpenBSD system is, you may want to add any of several excellent third party software applications. There are several ways to do this. You can: 1) Obtain the source code and build the application based upon whatever installation procedures are provided with the application. 2) Use the OpenBSD ``ports'' collection to automatically get any needed source file, apply any required patches, create the application, and install it for you. 3) Use the OpenBSD ``package'' collection to grab a pre-compiled and tested version of the application for your hardware. If you purchased the OpenBSD CD-ROM set you already have several popular ``packages'', and the ``ports'' collection. Instructions for installing applications from the various sources using the different installation methods follow. You should also refer to the packages(7) manual page. Installing applications from the CD-ROM package collection: The OpenBSD CD-ROM ships with several applications pre-built for various hardware architectures. The number of applications vary according to available disk space. Check the directory 4.7/packages/arm to see which packages are available for your hardware architecture. That directory will be on the same CD-ROM containing the OS installation files for your architecture. To install one or more of these packages you must: 1) become the superuser (root). 2) mount the appropriate CD-ROM. 3) use the ``pkg_add'' command to install the software. Example (in which we use su(1) to get superuser privileges, thus you have to be in group "wheel", see the manual page for su(1)). $ su Password: # mkdir -p /cdrom # mount /dev/cd0a /cdrom # pkg_add /cdrom/4.7/packages/arm/ # # umount /cdrom Package names are usually the application name and version with .tgz appended, e.g. emacs-21.3.tgz Installing applications from the ftp.OpenBSD.org package collection: All available packages for your architecture have been placed on ftp.OpenBSD.org in the directory pub/OpenBSD/4.7/packages/arm/ You may want to peruse this to see what packages are available. The packages are also on the OpenBSD FTP mirror sites. See http://www.OpenBSD.org/ftp.html for a list of current FTP mirror sites. Installation of a package is very easy. 1) become the superuser (root) 2) use the ``pkg_add'' command to install the software ``pkg_add'' is smart enough to know how to download the software from the OpenBSD FTP server. Example: $ su Password: # pkg_add \ ftp://ftp.OpenBSD.org/pub/OpenBSD/4.7/packages/arm/emacs-21.3.tgz Installing applications from the CD-ROM ports collection: The CD-ROM ``ports'' collection is a set of Makefiles, patches, and other files used to control the building and installation of an application from source files. Creating an application from sources can require a lot of disk space, sometimes 50 megabytes or more. The first step is to determine which of your disks has enough room. Once you've made this determination, read the file PORTS located on the CD-ROM which contains the ports tree. To build an application you must: 1) become the superuser (root) 2) have network access, or obtain the actual source files by some other means. 3) cd to the ports directory containing the port you wish to build. To build samba, for example, where you'd previously copied the ports files into the /usr/ports directory: cd /usr/ports/net/samba 4) make 5) make install 6) make clean Installing applications from the OpenBSD ports collection: See http://www.OpenBSD.org/ports.html for current instructions on obtaining and installing OpenBSD ports. You should also refer to the ports(7) manual page. Installing other applications: If an OpenBSD package or port does not exist for an application you're pretty much on your own. The first thing to do is ask if anyone is working on a port -- there may be one in progress. If no such port exists, you might want to look at the FreeBSD ports or NetBSD pkgsrc for inspiration. If you can't find an existing port, try to make your own and feed it back to OpenBSD. That's how our ports collection grows. Some details can be found at http://www.OpenBSD.org/porting.html with more help coming from the mailing list, . Administrivia: -------------- There are various mailing lists available via the mailing list server at . To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instructions. There are also two OpenBSD Usenet newsgroups, comp.unix.bsd.openbsd.announce for important announcements and comp.unix.bsd.openbsd.misc for general OpenBSD discussion. More information about the various OpenBSD mailing list and proper netiquette is available at http://www.OpenBSD.org/mail.html To report bugs, use the 'sendbug' command shipped with OpenBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Additionally, bug reports can be sent by mail to: bugs@OpenBSD.org Use of 'sendbug' is encouraged, however, because bugs reported with it are entered into the OpenBSD bugs database, and thus can't slip through the cracks. As a favor, please avoid mailing huge documents or files to the mailing lists. Instead, put the material you would have sent up for FTP somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. For more information about reporting bugs, see http://www.OpenBSD.org/report.html