Package: fm-common-dev Source: fm-common Version: 0.0.1-1 Architecture: amd64 Maintainer: Saul Wold Installed-Size: 7 Pre-Depends: libpq-dev, uuid-dev, python-dev Filename: ./amd64/fm-common-dev_0.0.1-1_amd64.deb Size: 1236 MD5sum: 94875e2a1cbabc7d1ae7dd657306fa88 SHA1: 0bd364bf2a706984706536ce12fe2df128df5846 SHA256: 1a8d2cc31e294bc571a0bdf857eb899093f5904eb36ec30b83ad8ee125b4db52 Section: misc Priority: extra Description: StarlingX Fault Management Client Library that provides APIs for applications to raise/clear/update active alarms. Package: ntp Version: 1:4.2.8p15+dfsg-1 Architecture: i386 Maintainer: Debian NTP Team Installed-Size: 2117 Depends: adduser, lsb-base (>= 3.2-13), netbase, tzdata, libc6 (>= 2.28), libcap2 (>= 1:2.10), libedit2 (>= 2.11-20080614-0), libopts25 (>= 1:5.18.12), libssl1.1 (>= 1.1.0) Recommends: sntp, perl:any Suggests: ntp-doc Conflicts: time-daemon Replaces: time-daemon Provides: time-daemon Filename: ./i386/ntp_4.2.8p15+dfsg-1_i386.deb Size: 793108 MD5sum: 4f2813fec72838c1741e7e74d73a99c0 SHA1: 9f9b959091fe30bb5b396a8a414d390a531ebfe0 SHA256: bb919dfbe9d08915ba33552e0f20e46a3c3653b6ebd4a172e874c274bff2ed81 Section: net Priority: optional Homepage: http://support.ntp.org/ Description: Network Time Protocol daemon and utility programs NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . This package contains the NTP daemon and utility programs. An NTP daemon needs to be running on each host that is to have its clock accuracy controlled by NTP. The same NTP daemon is also used to provide NTP service to other hosts. . For more information about the NTP protocol and NTP server configuration and operation, install the package "ntp-doc". Package: ntp Version: 1:4.2.8p15+dfsg-1 Architecture: amd64 Maintainer: Debian NTP Team Installed-Size: 2098 Depends: adduser, lsb-base (>= 3.2-13), netbase, tzdata, libc6 (>= 2.17), libcap2 (>= 1:2.10), libedit2 (>= 2.11-20080614-0), libopts25 (>= 1:5.18.12), libssl1.1 (>= 1.1.0) Recommends: sntp, perl:any Suggests: ntp-doc Conflicts: time-daemon Replaces: time-daemon Provides: time-daemon Filename: ./amd64/ntp_4.2.8p15+dfsg-1_amd64.deb Size: 779084 MD5sum: c873ad02edf70ffd19db3266a362c10c SHA1: e1d780eb6e299b82850b55a0e527dc57e3e6b5d6 SHA256: 4fdd7f6d4c7069e01b09583b9fdc463affc301e0a5c4c4b8c3e2803fc00e1cc7 Section: net Priority: optional Homepage: http://support.ntp.org/ Description: Network Time Protocol daemon and utility programs NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . This package contains the NTP daemon and utility programs. An NTP daemon needs to be running on each host that is to have its clock accuracy controlled by NTP. The same NTP daemon is also used to provide NTP service to other hosts. . For more information about the NTP protocol and NTP server configuration and operation, install the package "ntp-doc". Package: ntp-dbgsym Source: ntp Version: 1:4.2.8p15+dfsg-1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian NTP Team Installed-Size: 2220 Depends: ntp (= 1:4.2.8p15+dfsg-1) Filename: ./i386/ntp-dbgsym_4.2.8p15+dfsg-1_i386.deb Size: 2080916 MD5sum: 9abfd449bc61a79542d1d9fc1c97f313 SHA1: b62d239091cd5b32508abefc12ad7b298a6630a2 SHA256: fc34381742d3a1315ef68ed7f344ee96900c95771e0ec6c66eb0349bda2e64a2 Section: debug Priority: optional Description: debug symbols for ntp Build-Ids: 34941e53648f635b1345d6b396472ac99d900256 6f0206da47b89f3f346f677eac4eb8eb4bb65abf b33de4383742cc1704d59ac0d569caf526189816 c2febc52a589eee79628db4af72a68adda5fddeb c3f43d29717f0866520ac21c38b9182b8c761109 Package: ntp-dbgsym Source: ntp Version: 1:4.2.8p15+dfsg-1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian NTP Team Installed-Size: 2460 Depends: ntp (= 1:4.2.8p15+dfsg-1) Filename: ./amd64/ntp-dbgsym_4.2.8p15+dfsg-1_amd64.deb Size: 2303888 MD5sum: c262f17c8e47ec0b7752d65a4204a937 SHA1: 629d97421d0c9cbe5df484619ae76aba6588d100 SHA256: 82d5cb3fd7be54a144e164890fdf4713d602502664311cf10623c0253d34c89a Section: debug Priority: optional Description: debug symbols for ntp Build-Ids: 76287bb9b5ff1d1ad1a9d1cab6047640695f534f 82fa7f641d8eab1e276cd28c147b3b442105ff25 914ed995bceb1bfe00664b5970ed5160a2001f6c d9cbf0e8afca64aef007ac6e05357f5fc172dbd1 df265b3e8a25652fb027f244a46b9a8b3ea31161 Package: ntp-doc Source: ntp Version: 1:4.2.8p15+dfsg-1 Architecture: all Maintainer: Debian NTP Team Installed-Size: 2254 Filename: ./all/ntp-doc_4.2.8p15+dfsg-1_all.deb Size: 1280508 MD5sum: 04992329989fa05b616a630d1ad42937 SHA1: 4be6e57e5fa8ce039bcaf81220565d0a0464d541 SHA256: 4025b746dc6e112ee996be0c244c6d43d4a47eb5759b59a35f75845406d25a58 Section: doc Priority: optional Multi-Arch: foreign Homepage: http://support.ntp.org/ Description: Network Time Protocol documentation NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . This package contains HTML documentation for the ntp packages (ntp, ntpdate). Since there are no substantive man pages for ntp's programs and configuration files, this package is desirable for any setup beyond the simple default configuration. Package: ntpdate Source: ntp Version: 1:4.2.8p15+dfsg-1 Architecture: i386 Maintainer: Debian NTP Team Installed-Size: 245 Depends: netbase, libc6 (>= 2.28), libssl1.1 (>= 1.1.0) Filename: ./i386/ntpdate_4.2.8p15+dfsg-1_i386.deb Size: 159188 MD5sum: 542f15ad915a2db0a1780b47e1ca0192 SHA1: d219c1227dc2417142a2e44fd0d1694b80af03c9 SHA256: 505f02df6beec6d70ad3ca816c40a347f203a484360cebcbeedb13f4ce7a2070 Section: net Priority: optional Homepage: http://support.ntp.org/ Description: client for setting system time from NTP servers (deprecated) NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . ntpdate is deprecated. Please use sntp instead for manual or scripted NTP queries/syncs. Package: ntpdate Source: ntp Version: 1:4.2.8p15+dfsg-1 Architecture: amd64 Maintainer: Debian NTP Team Installed-Size: 239 Depends: netbase, libc6 (>= 2.17), libssl1.1 (>= 1.1.0) Filename: ./amd64/ntpdate_4.2.8p15+dfsg-1_amd64.deb Size: 156716 MD5sum: e84117a263b1c0a8da92d618b741ff15 SHA1: d802f7fdd5de885a585c01efea04f8552a4369dd SHA256: f6461704a0c1ad473c00be03ee6cb7cc3d6059a78ee8b4f1abaec26deca6d963 Section: net Priority: optional Homepage: http://support.ntp.org/ Description: client for setting system time from NTP servers (deprecated) NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . ntpdate is deprecated. Please use sntp instead for manual or scripted NTP queries/syncs. Package: ntpdate-dbgsym Source: ntp Version: 1:4.2.8p15+dfsg-1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian NTP Team Installed-Size: 219 Depends: ntpdate (= 1:4.2.8p15+dfsg-1) Filename: ./i386/ntpdate-dbgsym_4.2.8p15+dfsg-1_i386.deb Size: 198580 MD5sum: 290cc620881536a125b01222da7710cb SHA1: 7e0c1f755b24eb720f7d33b0cf189ac6df3d4537 SHA256: 76d0ef497340d4c081f63fa20eba57ead8f0a03d9ba4e63a54e9e0a02bc15980 Section: debug Priority: optional Description: debug symbols for ntpdate Build-Ids: 631950254e054d672299be064862a69ba0d69682 Package: ntpdate-dbgsym Source: ntp Version: 1:4.2.8p15+dfsg-1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian NTP Team Installed-Size: 244 Depends: ntpdate (= 1:4.2.8p15+dfsg-1) Filename: ./amd64/ntpdate-dbgsym_4.2.8p15+dfsg-1_amd64.deb Size: 221016 MD5sum: c20310b4ce37d23811ac2e03b4c75d74 SHA1: 11996d3e8ff028abd21ed8f49676919ba93ce786 SHA256: 144a7b851d2b4b0f8437c0d998900b3c57735c0a8d1f773a90de186c8ab8081f Section: debug Priority: optional Description: debug symbols for ntpdate Build-Ids: 90f1bc9661f819bf9966769e8b47e025df5b962b Package: sntp Source: ntp Version: 1:4.2.8p15+dfsg-1 Architecture: i386 Maintainer: Debian NTP Team Installed-Size: 291 Depends: libc6 (>= 2.28), libevent-core-2.1-6 (>= 2.1.8-stable), libevent-pthreads-2.1-6 (>= 2.1.8-stable), libopts25 (>= 1:5.18.12), libssl1.1 (>= 1.1.0) Breaks: ntp (<< 1:4.2.8p10+dfsg-3+exp3) Replaces: ntp (<< 1:4.2.8p10+dfsg-3+exp3) Filename: ./i386/sntp_4.2.8p15+dfsg-1_i386.deb Size: 174008 MD5sum: 9b873503c9836d8ee1213ab5cd40698f SHA1: ab50cd6568dbff809a9d4d5da009c562b78f113c SHA256: 1f1d47003f0092a4207947b6f57e64cbea5029f05f2cf18314c96a0041eef4e3 Section: net Priority: optional Homepage: http://support.ntp.org/ Description: Network Time Protocol - sntp client NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . sntp can be used as an SNTP client to query a NTP or SNTP server and either display the time or set the local system's time. It is not sufficient, however, for maintaining an accurate clock in the long run. Package: sntp Source: ntp Version: 1:4.2.8p15+dfsg-1 Architecture: amd64 Maintainer: Debian NTP Team Installed-Size: 289 Depends: libc6 (>= 2.17), libevent-core-2.1-6 (>= 2.1.8-stable), libevent-pthreads-2.1-6 (>= 2.1.8-stable), libopts25 (>= 1:5.18.12), libssl1.1 (>= 1.1.0) Breaks: ntp (<< 1:4.2.8p10+dfsg-3+exp3) Replaces: ntp (<< 1:4.2.8p10+dfsg-3+exp3) Filename: ./amd64/sntp_4.2.8p15+dfsg-1_amd64.deb Size: 170936 MD5sum: 16a14325284c8e5f0c2b22201c748691 SHA1: f3d0c37294230afbd211ebecd56dc6caf6632022 SHA256: 991de4c68c2ed834dbaf246feca37d1979a550193803ab5420671bff1726e571 Section: net Priority: optional Homepage: http://support.ntp.org/ Description: Network Time Protocol - sntp client NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . sntp can be used as an SNTP client to query a NTP or SNTP server and either display the time or set the local system's time. It is not sufficient, however, for maintaining an accurate clock in the long run. Package: sntp-dbgsym Source: ntp Version: 1:4.2.8p15+dfsg-1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian NTP Team Installed-Size: 261 Depends: sntp (= 1:4.2.8p15+dfsg-1) Filename: ./i386/sntp-dbgsym_4.2.8p15+dfsg-1_i386.deb Size: 238508 MD5sum: 46b7b63256edd08e7f787de0c028414e SHA1: 8d26fd18fbc8cde1ce8863ebccfb87b4b84b3fc2 SHA256: 8f60eeb7ddfc01c61d97dce97138fa29fb16bba7f87e5c0d6c990bf1cc365574 Section: debug Priority: optional Description: debug symbols for sntp Build-Ids: 7e03df710f854353f0f534d6fdeee1b6cfa1cb5e Package: sntp-dbgsym Source: ntp Version: 1:4.2.8p15+dfsg-1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian NTP Team Installed-Size: 295 Depends: sntp (= 1:4.2.8p15+dfsg-1) Filename: ./amd64/sntp-dbgsym_4.2.8p15+dfsg-1_amd64.deb Size: 268036 MD5sum: 0d59cac0b8d66c3fa58d850791f6fc92 SHA1: df915ec6c0f0c36b518c14f2d4a05c72ad1b892a SHA256: 54b73292673d146b9708b82418312f56331de614e1fe6183ca275f97784db4c1 Section: debug Priority: optional Description: debug symbols for sntp Build-Ids: 0f3e2cb2421aa70a357476d510e9e173e9dbaf23